On 01/18/2008 10:50:07 AM, David BERCOT wrote: > Hi, > > Like many others, I'm trying to use my TT S2-3200 under Debian. > Before > trying softwares (VDR, etc...), I'd like to install it properly. > > Here is my steps (from many tutorials) : > FIRMWARE > # mkdir /data/debian/DVB > # cd /data/debian/DVB > # wget http://www.linuxtv.org/downloads/firmware/dvb-ttpci-01.fw-2622 > # cd /lib/firmware/ > # cp -a /data/debian/DVB/dvb-ttpci-01.fw-2622 . > # ln -s dvb-ttpci-01.fw-2622 dvb-ttpci-01.fw > > DRIVER > # cd /data/debian/DVB > # apt-get install mercurial > # hg clone http://jusst.de/hg/multiproto > # cd multiproto > # make > # make install > # modprobe stb6100 > # modprobe stb0899 > # modprobe lnbp21 > # modprobe budget-ci > > DMESG > # dmesg > saa7146: register extension 'budget_ci dvb'. > ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22 > saa7146: found saa7146 @ mem ffffc20001598c00 (revision 1, irq 22) > (0x13c2,0x1019). > saa7146 (0): dma buffer size 192512 > DVB: registering new adapter (TT-Budget S2-3200 PCI) > adapter has MAC addr = 00:d0:5c:0b:a5:8b > input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input9 > budget_ci: CI interface initialised > stb0899_write_regs [0xf1b6]: 02 > stb0899_write_regs [0xf1c2]: 00 > stb0899_write_regs [0xf1c3]: 00 > _stb0899_read_reg: Reg=[0xf000], data=81 > stb0899_get_dev_id: ID reg=[0x81] > stb0899_get_dev_id: Device ID=[8], Release=[1] > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > Offset=[0xf334], Data=[0x444d4431] > _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], > Offset=[0xf33c], Data=[0x00000001] stb0899_get_dev_id: Demodulator > Core > ID=[DMD1], Version=[1] _stb0899_read_s2reg Device=[0xfafc], Base > address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331] > _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], > Offset=[0xfa34], Data=[0x00000001] stb0899_get_dev_id: FEC Core > ID=[FEC1], Version=[1] stb0899_attach: Attaching STB0899 > stb6100_attach: Attaching STB6100 DVB: registering frontend 0 > (STB0899 > Multistandard)... dvb_ca adaptor 0: PC card did not respond :( > > Do you have any clue about this error ? > > Thank you very much. > Hi David, did you manage to test with the cam to get something working? I would be thrilled to know if someone has ever managed to get the TT 3200 to work with a CAM (I mean the full monty: lock+good picture ;-) Bye Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
