In Ubuntu 7.10 with kernel 2.6.22-14.47 I installed a Hauppauge HVR 4000.
From http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000
I made a driver update and a firmware update.
In dmesg the card is recognized.
In dvbsnoop are the current parameters not found
dvbsnoop -s feinfo -pd 9
dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/
DEMUX : /dev/dvb/adapter0/demux0
DVR : /dev/dvb/adapter0/dvr0
FRONTEND: /dev/dvb/adapter0/frontend0
---------------------------------------------------------
FrontEnd Info...
---------------------------------------------------------
Device: /dev/dvb/adapter0/frontend0
Basic capabilities:
Name: "Conexant CX24116/CX24118"
Frontend-type: QPSK (DVB-S)
Frequency (min): 950.000 MHz
Frequency (max): 2150.000 MHz
Frequency stepsiz: 1.011 MHz
Frequency tolerance: 5000
Symbol rate (min): 1.000000 MSym/s
Symbol rate (max): 45.000000 MSym/s
Symbol rate tolerance: 0 ppm
Notifier delay: 0 ms
Frontend capabilities:
auto inversion
FEC 1/2
FEC 2/3
FEC 3/4
FEC 4/5
FEC 5/6
FEC 6/7
FEC 7/8
FEC AUTO
QPSK
Current parameters:
Error(95): frontend ioctl: Operation not supported
following dmesg is the firmware not loaded
Is the update procedure from http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000
correct?
Thanks in advance
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
