moi
It does not work for me. It says same PID-filter timeout as I have got
earlier. I don't have amplified antenna now, but I can say that all
other DVB-T sticks I have are working with this small antenna. It could
be that sensitivity of this hardware is bad or there is something wrong
with driver or firmware. Lets try to test it Windows to see if it is
working or not.
Logs attached.
regards
Antti
Albert Comerma wrote:
Hey people, we already solved this problems. I submitted a patch a few
days ago, but I think it's not on the current sources. I send again the
patch. Basically it must use the same frontend description as asus cards.
Albert
2008/2/18, Antti Palosaari <crope@xxxxxx <mailto:crope@xxxxxx>>:
moikka
I have also this device (express card). I haven't looked inside yet, but
I think there is DibCOM STK7700D (in my understanding dual demod chip)
and only *one* MT2266 tuner. I tried various GPIO settings but no
luck yet.
GPIO6 is for MT2266.
GPIO9 and GPIO10 are for frontend.
Looks like tuner goes to correct frequency because I got always
PID-filter timeouts when tuning to correct freq. I will now try to take
some usb-sniffs to see configuration used. Any help is welcome.
regards
Antti
Albert Comerma wrote:
> Hi!, with Michel (mm-sl@xxxxxxxxxxxxx
<mailto:mm-sl@xxxxxxxxxxxxx> <mailto:mm-sl@xxxxxxxxxxxxx
<mailto:mm-sl@xxxxxxxxxxxxx>>) who
> is a owner of this Yuan card we added the device to
dib0700_devices, and
> we got it recognized without problems. The only problem is that no
> channel is detected on scan on kaffeine or other software... I
post some
> dmesg. We don't know where it may be the problem... or how to
detect it...
>
> usb 4-2: new high speed USB device using ehci_hcd and address 6
> usb 4-2: new device found, idVendor=1164, idProduct=1edc
> usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=3
> usb 4-2: Product: STK7700D
> usb 4-2: Manufacturer: YUANRD
> usb 4-2: SerialNumber: 0000000001
> usb 4-2: configuration #1 chosen from 1 choice
> dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a
firmware
> dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
> dib0700: firmware started successfully.
> dvb-usb: found a 'Yuan EC372S' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the
software
> demuxer.
> DVB: registering new adapter (Yuan EC372S)
> dvb-usb: no frontend was attached by 'Yuan EC372S'
> dvb-usb: will pass the complete MPEG2 transport stream to the
software
> demuxer.
> DVB: registering new adapter (Yuan EC372S)
> DVB: registering frontend 1 (DiBcom 7000PC)...
> MT2266: successfully identified
> input: IR-receiver inside an USB DVB receiver as /class/input/input10
> dvb-usb: schedule remote query interval to 150 msecs.
> dvb-usb: Yuan EC372S successfully initialized and connected.
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@xxxxxxxxxxx <mailto:linux-dvb@xxxxxxxxxxx>
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
http://palosaari.fi/
------------------------------------------------------------------------
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
http://palosaari.fi/
Bus 001 Device 005: ID 1164:1edc YUAN High-Tech Development Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1164 YUAN High-Tech Development Co., Ltd
idProduct 0x1edc
bcdDevice 1.00
iManufacturer 1 YUANRD
iProduct 2 STK7700D
iSerial 3 0000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Feb 18 23:50:53 localhost kernel: usb 1-8: USB disconnect, address 5
Feb 18 23:50:55 localhost kernel: usb 1-8: new high speed USB device using ehci_hcd and address 6
Feb 18 23:50:55 localhost kernel: usb 1-8: configuration #1 chosen from 1 choice
Feb 18 23:50:55 localhost kernel: dib0700: loaded with support for 6 different device-types
Feb 18 23:50:55 localhost kernel: dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware
Feb 18 23:50:55 localhost kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Feb 18 23:50:55 localhost kernel: dib0700: firmware started successfully.
Feb 18 23:50:56 localhost kernel: dvb-usb: found a 'Yuan EC372S' in warm state.
Feb 18 23:50:56 localhost kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Feb 18 23:50:56 localhost kernel: DVB: registering new adapter (Yuan EC372S)
Feb 18 23:50:56 localhost kernel: DVB: registering frontend 0 (DiBcom 7000PC)...
Feb 18 23:50:56 localhost kernel: MT2266: successfully identified
Feb 18 23:50:56 localhost kernel: dvb-usb: Yuan EC372S successfully initialized and connected.
Feb 18 23:50:56 localhost kernel: usbcore: registered new interface driver dvb_usb_dib0700
[crope@localhost linuxtv]$ scandvb fi-Oulu
scanning fi-Oulu
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 634000000 0 2 9 3 1 2 0
initial transponder 714000000 0 2 9 3 1 2 0
initial transponder 738000000 0 2 9 3 1 2 0
initial transponder 602000000 0 2 9 3 1 2 0
>>> tune to: 634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.
[crope@localhost linuxtv]$
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
