Hello, I got two KNC DVB-S cards, an older one (1894:0010) and a new KNC TV STAR model, (1894:0016) on FC6 running last kernel (2.6.24). The old card works fine, I have no problems with it. The second one, after I tune o a channel on a vertical polarity, doesn't want to tune on any horizontal channel anymore: # szap -c ./astra.conf -a0 "BBC World" reading channels from file './astra.conf' zapping to 3 'BBC World': sat 0, frequency = 11597 MHz V, symbolrate 22000000, vpid = 0x00a3, apid = 0x005c sid = 0x2742 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal d9a0 | snr 965d | ber 0000db00 | unc 00000000 | status 1f | signal e100 | snr dd9d | ber 00005e00 | unc 00000000 | FE_HAS_LOCK ........... # szap -c ./astra.conf -a0 "ZDF" reading channels from file './astra.conf' zapping to 161 'ZDF': sat 0, frequency = 11953 MHz H, symbolrate 27500000, vpid = 0x006e, apid = 0x0078 sid = 0x6d66 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal b3e0 | snr 9be2 | ber 00009e00 | unc 00000000 | status 03 | signal b3d1 | snr a71c | ber 0000ff30 | unc 00000000 | Back to "BBC World", it locks fine. but no chance to lock on ZDF anymore. If I replug the sat cable, it starts to work again, until I switch again on a "V" channel. I checked the polarity switch, the card delivers 19.2V, so there is no power problem. The difference between cards is the tuner, the new one uses a Philips SD1878. As long as the first card works like charm, I assume the the sat switch works fine. Any idea what goes wrong, anyone ? Regards, Doru _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
