Am Sonntag 20 Januar 2008 schrieb Peter D.: > On Sunday 20 January 2008, Jeff Bailes wrote: > > Hi, > > Back in November, channel Seven changed their fec_hi from 2/3 to 3/4 > > causing scans to not pick it up > > ( http://www.dba.org.au/index.asp?sectionID=39&newsID=982&display=news ). > > The new entry in the au-Melbourne file for channel seven should be: > > # Seven > > T 177500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE > > > > I attached the complete updated file anyway. > > Jeff > > They are a pain. > > Anyway, according to the web site that you quoted, all tuners that comply > with Australian standards will cope without adjustment. Unfortunately > not all tuners comply with Australian standards. :-( I don't think it's about the tuner, but about the receivers in general. I've never had a look into the relevant standards (how could I?), but likely it's rather a soft- than a hardware issue. > Presumably all au-tuning_files should have their channel 7 entry updated. > Can this be done at the data base end, or do all files have to be > re-submitted? Also the GI in Brisbane is noted as changing as well. I think it's time that the apps start to use some kind of auto scan (and emulate *_AUTO in sw for cards that don't support it); there are 459 dvb-t transmitters listed on dba/au, and it isn't nice to keep that up to date if some guys sometimes have the intention to adjust something ... Christoph _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
