Hi again, I'm looking for a solution for my TT S2-3200. I've just compiled again the multiproto driver and I had this errors : CC [M] /opt/dvb/multiproto/v4l/stb0899_drv.o /opt/dvb/multiproto/v4l/stb0899_drv.c: In function 'stb0899_read_regs': /opt/dvb/multiproto/v4l/stb0899_drv.c:471: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c: In function 'stb0899_write_regs': /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format '%u' expects type 'unsigned int', but argument 5 has type 'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format '%u' expects type 'unsigned int', but argument 5 has type 'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format '%u' expects type 'unsigned int', but argument 5 has type 'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format '%u' expects type 'unsigned int', but argument 5 has type 'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c:533: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t' /opt/dvb/multiproto/v4l/stb0899_drv.c: In function 'stb0899_diseqc_init': /opt/dvb/multiproto/v4l/stb0899_drv.c:834: warning: unused variable 'ret_2' /opt/dvb/multiproto/v4l/stb0899_drv.c:833: warning: unused variable 'ret_1' /opt/dvb/multiproto/v4l/stb0899_drv.c:832: warning: unused variable 'trial' /opt/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused variable 'i' /opt/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused variable 'count' /opt/dvb/multiproto/v4l/stb0899_drv.c:826: warning: unused variable 'rx_data' /opt/dvb/multiproto/v4l/stb0899_drv.c: In function 'stb0899_sleep': /opt/dvb/multiproto/v4l/stb0899_drv.c:899: warning: unused variable 'reg' /opt/dvb/multiproto/v4l/stb0899_drv.c: In function 'stb0899_track': /opt/dvb/multiproto/v4l/stb0899_drv.c:1917: warning: unused variable 'internal' /opt/dvb/multiproto/v4l/stb0899_drv.c:1914: warning: unused variable 'lock_lost' /opt/dvb/multiproto/v4l/stb0899_drv.c: At top level: /opt/dvb/multiproto/v4l/stb0899_drv.c:1709: warning: 'stb0899_track_carrier' defined but not used /opt/dvb/multiproto/v4l/stb0899_drv.c:1726: warning: 'stb0899_get_ifagc' defined but not used /opt/dvb/multiproto/v4l/stb0899_drv.c:1743: warning: 'stb0899_get_s1fec' defined but not used /opt/dvb/multiproto/v4l/stb0899_drv.c:1771: warning: 'stb0899_get_modcod' defined but not used CC [M] /opt/dvb/multiproto/v4l/stb0899_algo.o /opt/dvb/multiproto/v4l/stb0899_algo.c: In function 'stb0899_set_srate': /opt/dvb/multiproto/v4l/stb0899_algo.c:77: warning: unused variable 'sfr_up' /opt/dvb/multiproto/v4l/stb0899_algo.c:76: warning: unused variable 'srate_up' /opt/dvb/multiproto/v4l/stb0899_algo.c:76: warning: unused variable 'tmp_up' /opt/dvb/multiproto/v4l/stb0899_algo.c: In function 'stb0899_check_tmg': /opt/dvb/multiproto/v4l/stb0899_algo.c:203: warning: overflow in implicit constant conversion These are only warnings, but, may be, I miss something and it can explain my dmesg error : saa7146: register extension 'budget_ci dvb'. ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22 saa7146: found saa7146 @ mem ffffc20001450c00 (revision 1, irq 22) (0x13c2,0x1019). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget S2-3200 PCI) adapter has MAC addr = 00:d0:5c:0b:a5:8b input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input7 budget_ci: CI interface initialised stb0899_write_regs [0xf1b6]: 02 stb0899_write_regs [0xf1c2]: 00 stb0899_write_regs [0xf1c3]: 00 _stb0899_read_reg: Reg=[0xf000], data=81 stb0899_get_dev_id: ID reg=[0x81] stb0899_get_dev_id: Device ID=[8], Release=[1] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001] stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001] stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] stb0899_attach: Attaching STB0899 stb6100_attach: Attaching STB6100 DVB: registering frontend 0 (STB0899 Multistandard)... dvb_ca adaptor 0: PC card did not respond :( Do you have any idea ? Thank you very much. David.
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
