regards
Newsy
Newsy Paper <newspaperman_germany@xxxxxxxxx> schrieb:
Hi!
seems there is a bug with the hw pid filtering.
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 1
b2c2-flexcop: MAC address = 00:d0:d7:01:0b:58
b2c2-flexcop: found the stv0299 at i2c address: 0x68
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopII' complete
Although the filtering is enabled it's not possible to watch tv channels of transponders that have a bitrate > 42 mbit/s. With my VDR the transponders will be read corretly, but when I try to watch one channel of such a transponder I get many dropouts. In Windows these Tranponders are working just fine with AltDvb2.2 while Altdvb 2.1 shows the same problem.
You can find some problem transponders on Hellassat 39°O each with SR 30000 FEC 7/8. On 16°O there is also a transponders with that problems, also 30000 7/8 but all streams are encrypted.
Is it a problem of the HW Pid filter? Are further SW Pid filters necessary? Or is it even a bug in VDR?
kind regards
Newspaperman
Beginnen Sie den Tag mit den neuesten Nachrichten. Machen Sie Yahoo! zu Ihrer Startseite!
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
