Hi, As I write last week, I've tried to install the driver for my TT S2-3200 card, on Debian. I have an error at the end (see below), but I'd like to do a quick test to see if the card is OK. Do you know which soft can I use for this test ? Thank you very much. David. P.S. : my dmesg... saa7146: register extension 'budget_ci dvb'. ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22 saa7146: found saa7146 @ mem ffffc20001450c00 (revision 1, irq 22) (0x13c2,0x1019). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (TT-Budget S2-3200 PCI) adapter has MAC addr = 00:d0:5c:0b:a5:8b input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input4 budget_ci: CI interface initialised ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 stb0899_write_regs [0xf1b6]: 02 stb0899_write_regs [0xf1c2]: 00 stb0899_write_regs [0xf1c3]: 00 _stb0899_read_reg: Reg=[0xf000], data=81 stb0899_get_dev_id: ID reg=[0x81] stb0899_get_dev_id: Device ID=[8], Release=[1] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x444d4431] _stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x00000001] stb0899_get_dev_id: Demodulator Core ID=[DMD1], Version=[1] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x46454331] _stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x00000001] stb0899_get_dev_id: FEC Core ID=[FEC1], Version=[1] stb0899_attach: Attaching STB0899 stb6100_attach: Attaching STB6100 DVB: registering frontend 0 (STB0899 Multistandard)... EXT3 FS on dm-0, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2097144k swap on /dev/mapper/VG_Wilco-LV_Swap. Priority:-1 extents:1 across:2097144k ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) ip6_tables: (C) 2000-2006 Netfilter Core Team skge eth1: enabling interface NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready ctnetlink v0.93: registering with nfnetlink. ClusterIP Version 0.8 loaded successfully skge eth1: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready dvb_ca adaptor 0: PC card did not respond :(
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
