hermann pitton wrote: > Yes, hardware capabilities are different. That's why I said give it at least a try. Do so, No worries. So I modified the frequency file and run scan. This is still with the auto-everything patch. With the unmodified file this is the output: scanning dvb-t/au-Sydney-GoreHill using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 226500000 1 3 9 3 1 1 0 initial transponder 191625000 1 3 9 3 1 1 0 initial transponder 571500000 1 2 9 3 1 2 0 initial transponder 578500000 1 2 9 3 1 2 0 initial transponder 648500000 1 3 9 3 1 1 0 initial transponder 669500000 1 2 9 3 1 2 0 ... snip ... this is the first one that works with the other card ... snip ... >>> tune to: 571500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 ... etc ... Then add 167000Hz to the input file and re-scan: scanning dvb-t/au-Sydney-GoreHill+167000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 226667000 1 3 9 3 1 1 0 initial transponder 191792000 1 3 9 3 1 1 0 initial transponder 571667000 1 2 9 3 1 2 0 initial transponder 578667000 1 2 9 3 1 2 0 initial transponder 648667000 1 3 9 3 1 1 0 initial transponder 669667000 1 2 9 3 1 2 0 ... snip ... this is the first one that works with the other card ... snip ... >>> tune to: 571667000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 571667000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! ... etc ... So adding a frequency offset doesn't find anything but that filter timeout message disappears. Cheers, Rob _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
