Hi Carsten, right, this happened quite a while ago, and all Receivers/VDR already use the new frequencies. So it's something different. :-( Oliver -----Original Message----- From: Carsten Aulbert [mailto:carsten@xxxxxxxxxxxxxxxx] Sent: Mittwoch, 9. Januar 2008 07:52 To: Oliver Bardenheier (obardenh) Cc: linux-dvb@xxxxxxxxxxx Subject: Re: Frontend doesn't tune in on Pro7 channels when SatReceiver is active on Multiswitch Oliver Bardenheier (obardenh) schrieb: > I have a strange behaviour since a few days on my VDR > > I have a 9/8 Multiswitch with two VDRs and a Humax PR-1000HD connected. > > When I switch on the Humax I don't get the frontend synched on the VDR > with a NOVA-S-Plus (mercurial tree) > > ProSieben;ProSiebenSat.1:12545:hC56:S19.2E:22000:511:512=deu;515=dd:33 > :0 > :17501:1:1107:0 > > All other channels got synched, only Sat1, Pro7, Kabel, 9live, etc. > don't get a lock. > Any ideas if this could be a driver issue or where to look at ? Hi, I don't know if they switched satelite channels during the past year. If not, the effect you are seeing could be caused by a wireless telephone (DECT) since I believe DECt frequencies are in the same range as the "downsampled" DVB-S signals in-house. But I think they wanted to switch at some point, so it might not apply to you. So my guess would be that there is a new telephone nearby (or badly isolated cables). HTH Carsten _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
