Brougs78 schrieb: > Reinhard Nissl schrieb: >> Hi, >> >> Brougs78 schrieb: >> >>> Should diseqc allready work with the current multiproto-driver? >>> >>> I've got a multiswitch where 2 satellites are attached to it. It seems >>> that I don't get a lock with the TT 3200. >>> >>> This is the only thing I'm really missing right now. Everething else is >>> working really well with that card. Thanks to the driver developers out >>> there. >> I've been using DiSEqC all the time with this card and VDR to >> control my multiswitch for ASTRA 19.2 E and Hotbird 13.0 E. > Hi Reinhard! > > Could you please attach your diseqc.conf? > > My recent config worked well with a DVB-s budget-card but it seems that > it doesn't with the TT 3200: > > S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W1 [E1 10 38 F4] W1 [E1 10 38 > F4] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 t > S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W1 [E1 10 38 F5] W1 [E1 10 38 > F5] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 T > S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W1 [E1 10 38 F6] W1 [E1 10 38 > F6] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 t > S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W1 [E1 10 38 F7] W1 [E1 10 38 > F7] W15 [E0 31 6B 01] W1 [E1 31 6B 01] W1 [E1 31 6B 01] W15 T > > S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W5 [E1 10 38 F0] W5 [E1 10 38 > F0] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 t > S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W5 [E1 10 38 F1] W5 [E1 10 38 > F1] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 T > S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W5 [E1 10 38 F2] W5 [E1 10 38 > F2] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 t > S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W5 [E1 10 38 F3] W5 [E1 10 38 > F3] W15 [E0 31 6B 02] W1 [E1 31 6B 02] W1 [E1 31 6B 02] W15 T > > I think the problem here could be, that on the first card (FF-card) i > have a rotor and on the second card a regular diseqc-switch with a dish > with 2 lnb's. And the diseqc.conf has to work with both setups. > > But I will try to simplify the diseqc.conf and see if it works. Ok, I tried the "default" diseqc.conf which i found in the german vdr-wiki and it works as expectet. I'm not using the rotor anyways so there is no reason to keep the old config: S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 A W15 t S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 A W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 A W15 t S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 A W15 T S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 B W15 t S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 B W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 B W15 t S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 B W15 T _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
