Hi folks, Since I installed a TechnoTrend 1500 Budget (with optional budget-ci CAM board), my kernel crashes completely everytime I run a frequency scan using the w_scan utility. There's no kernel panic message or anything printed to the tty, just instant death. The server box (dual quadcore Xeon) ran perfectly stable until I installed the T-1500 last week, and still runs stable as long as I don't use the card. I started out using a stock 2.6.22-something kernel (vanilla Fedora 8 and Ubuntu 7.10 server), then switched to 2.6.24-rc6 (generated at 2007-12-21) and finally tried today's trunk of http://linuxtv.org/hg/v4l-dvb using hg, on top of my 2.6.24-rc6 kernel. Yet, every combination dies. The kernel usually dies the first time "w_scan -x" (http://wirbel.htpc-forum.de/w_scan/index2.html version 20071209) is run and then usually dies near the end when w_scan prints "tune to:". Occasionally it takes more than one run before it crashes. The box is idle during the scan and there's no other PCI activity. I'm using firmware dvb-fe-tda10046.fw, installed using get_dvb_firmware. regards, Erik van Zijst _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
