Hello! I'm trying to get my HVR4000 working with DVB-S2 and VDR but tonight I think I have figured out that I have a problem with the driver or something as I cant get lock on a S2-channel with szap2 ... This is what I've done: Downloaded the latest hg from http://jusst.de/hg/multiproto Patched it with this patch: http://www.mail-archive.com/linux-dvb@xxxxxxxxxxx/msg28003/multiproto-hvr4k.patch.bz2 make all; make install modprobe isl6421 modprobe cx24116 modprobe cx88-dvb Then I downloaded a szap2 from somewhere on the net ;-) radiokaka szap2 # ./szap2 -t 2 "SVT HD" reading channels from file '/root/.szap/channels.conf' zapping to 3 'SVT HD': sat 1, frequency = 11421 MHz H, symbolrate 25000000, vpid = 0x0200, apid = 0x0280 sid = 0x0ed9 (fec = -2147483648, mod = 2) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'Conexant CX24116/CX24118' DVB-S diseqc: sat_no:1 pol_vert:0 hi_band:0 cmd:e0 10 38 f6 wait:0 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 1671000, Srate = 25000000 (DVB-S2) do_tune: Frequency = 1671000, Srate = 25000000 (SET_PARAMS) status 01 | signal d1c0 | snr 0000 | ber 00000000 | unc 00000000 | (it's on my second port on the Diseqc) And this is my ~/.szap/channels.conf entry: SVT HD:11421:h:1:25000:512:640:3801 dmesg gives the following output: cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=58,autodetected] TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner tveeprom 2-0050: Hauppauge model 69009, rev B2D3, serial# 1705190 tveeprom 2-0050: MAC address is 00-0D-FE-1A-04-E6 tveeprom 2-0050: tuner model is Philips FMD1216MEX (idx 133, type 63) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 2-0050: audio processor is CX882 (idx 33) tveeprom 2-0050: decoder processor is CX882 (idx 25) tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter cx88[0]: hauppauge eeprom: model=69009 input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input2 cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18 ACPI: PCI Interrupt 0000:04:08.2[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18 cx88[0]/2: found at 0000:04:08.2, rev: 5, irq: 18, latency: 64, mmio: 0xf8000000 cx2388x dvb driver version 0.0.6 loaded cx8802_register_driver() ->registering driver type=dvb access=shared CORE cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=58] cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]) DVB: registering frontend 0 (Conexant CX24116/CX24118)... cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)... cx24116_firmware_ondemand: Waiting for firmware upload(2)... cx24116_load_firmware: FW version 1.20.79.0 cx24116_firmware_ondemand: Firmware upload complete dvb_frontend_ioctl: DVBFE_GET_INFO dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 lsmod: Module Size Used by lirc_mceusb2 12356 1 lirc_dev 13816 1 lirc_mceusb2 nvidia 8888772 36 cx88_dvb 16328 0 cx88_vp3054_i2c 4672 1 cx88_dvb cx8802 17860 1 cx88_dvb cx88xx 65124 2 cx88_dvb,cx8802 ir_common 33540 1 cx88xx tveeprom 18448 1 cx88xx videodev 27136 1 cx88xx v4l2_common 19264 2 cx88xx,videodev v4l1_compat 13188 1 videodev btcx_risc 6088 2 cx8802,cx88xx video_buf_dvb 7108 1 cx88_dvb dvb_core 83824 1 video_buf_dvb video_buf 23108 4 cx88_dvb,cx8802,cx88xx,video_buf_dvb cx24116 16784 1 isl6421 4096 1 I can get lock on all DVB-S channels using szap2 or szap Is there anyone that sees what I'm doing wrong? I've been struggling with this for a few days and it would be great to get it working! Thanks for any help! Best regards Lars Fredriksson _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
