On 28/12/2007, at 1:58 PM, Tom Lanyon wrote: > Hi all, > > I just installed a Bt878 DVB-T card into a machine running kernel > 2.6.23; the card was detected and all the /dev/dvb nodes were created, > but a 'dvbscan' is unable to find any channels. > > I checked that the initial scanning file has the correct frequencies > for my area (it does). The card is plugged into a large outdoor > antenna, which is able to pick up the same channels when plugged into > regular digital set-top-box. > > How can I debug this further? More information below. > > Regards, > Tom -snip- see initial post for additional output Sorry to follow up my own post, but really keen to get this working - I've had this card working under linux a few years ago, so the card is/ was supported. The antenna works for my digital set-top-box. I verified that the initial tuning data is correct. What else can I try? Tom _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb