When I plug my Hauppauge WinTV Nova-TD stick into an Asus Pundit AB-P 2600, it is detected as a full speed USB device. It should be detected as a high speed USB device.
I bought this computer on 2003. The motherboard is a P4S8L. I also have tested in a brand new Asus Pundit, and the same stick is well detected as a high speed device, and it works with no problems. In the old one, the kernel log says "dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)".
I have tested on Linux 2.6.22-14-generic on Ubuntu 7.10, with the latest sources of V4L-DVB installed (mercurial repository on 2007-12-21).
lsusb shows this:
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 2040:9580 Hauppauge
Bus 002 Device 001: ID 0000:0000
The kern.log is this one:
Dec 21 22:36:51 htpc kernel: [ 7957.549591] usb 2-2: new full speed USB device using ohci_hcd and address 2
Dec 21 22:36:51 htpc kernel: [ 7957.750188 ] usb 2-2: not running at top speed; connect to a high speed hub
Dec 21 22:36:51 htpc kernel: [ 7957.768275] usb 2-2: configuration #1 chosen from 1 choice
Dec 21 22:36:52 htpc kernel: [ 7958.296980] dib0700: loaded with support for 5 different device-types
Dec 21 22:36:52 htpc kernel: [ 7958.299304] FW GET_VERSION length: -32
Dec 21 22:36:52 htpc kernel: [ 7958.299311] cold: 1
Dec 21 22:36:52 htpc kernel: [ 7958.299314] dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in cold state, will try to load a firmware
Dec 21 22:36:52 htpc kernel: [ 7958.428510] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Dec 21 22:36:58 htpc kernel: [ 7963.996628] dib0700: firmware started successfully.
Dec 21 22:36:58 htpc kernel: [ 7964.498000] dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in warm state.
Dec 21 22:36:58 htpc kernel: [ 7964.505592] i2c-adapter i2c-2: SMBus Quick command not supported, can't probe for chips
Dec 21 22:36:58 htpc kernel: [ 7964.505608] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
Dec 21 22:36:58 htpc kernel: [ 7964.506525] dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity error while loading driver (-19)
Dec 21 22:36:58 htpc kernel: [ 7964.506971] usbcore: registered new interface driver dvb_usb_dib0700
Dec 21 22:36:51 htpc kernel: [ 7957.750188 ] usb 2-2: not running at top speed; connect to a high speed hub
Dec 21 22:36:51 htpc kernel: [ 7957.768275] usb 2-2: configuration #1 chosen from 1 choice
Dec 21 22:36:52 htpc kernel: [ 7958.296980] dib0700: loaded with support for 5 different device-types
Dec 21 22:36:52 htpc kernel: [ 7958.299304] FW GET_VERSION length: -32
Dec 21 22:36:52 htpc kernel: [ 7958.299311] cold: 1
Dec 21 22:36:52 htpc kernel: [ 7958.299314] dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in cold state, will try to load a firmware
Dec 21 22:36:52 htpc kernel: [ 7958.428510] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Dec 21 22:36:58 htpc kernel: [ 7963.996628] dib0700: firmware started successfully.
Dec 21 22:36:58 htpc kernel: [ 7964.498000] dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in warm state.
Dec 21 22:36:58 htpc kernel: [ 7964.505592] i2c-adapter i2c-2: SMBus Quick command not supported, can't probe for chips
Dec 21 22:36:58 htpc kernel: [ 7964.505608] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
Dec 21 22:36:58 htpc kernel: [ 7964.506525] dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity error while loading driver (-19)
Dec 21 22:36:58 htpc kernel: [ 7964.506971] usbcore: registered new interface driver dvb_usb_dib0700
Thanks for any comments.
Regards,
Jordi
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
