Hi, i tried to get the Hauppauge WinTV-HVR3000 to work with the latest Mercurial software package, but had currently no success to receive a program by DVB-T or DVB-S. Is there a chance to get this card working? w_scan shows the following output: uli:/tmp # w_scan -a 0 -fc w_scan version 20071209 -_-_-_-_ Getting frontend capabilities-_-_-_-_ frontend Conexant CX22702 DVB-T supports INVERSION_AUTO QAM_AUTO TRANSMISSION_MODE_AUTO GUARD_INTERVAL_AUTO HIERARCHY_AUTO FEC_AUTO -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 177500: 184500: 191500: 198500: 205500: 212500: 219500: 226500: 474000: 482000: signal ok (I999B8C999D999M999T999G999Y999) [..] 578000: signal ok (I999B8C999D999M999T999G999Y999) [..] 858000: tune to: :482000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 tune to: :578000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 tune to: :602000:I999B8C999D999M999T999G999Y999:T:27500: Info: filter timeout pid 0x0011 Info: filter timeout pid 0x0000 Info: filter timeout pid 0x0010 dumping lists (0 services) Done. The card seems to be recognized: cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53,autodetected] cx88[0]: TV tuner type 63, Radio tuner type -1 cx88[0]: Test OK tveeprom 0-0050: Hauppauge model 14109, rev B3D3, serial# 2956915 tveeprom 0-0050: MAC address is 00-0D-FE-2D-1E-73 tveeprom 0-0050: tuner model is Philips FMD1216MEX (idx 133, type 4) tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB D igital (eeprom 0xf4) tveeprom 0-0050: audio processor is CX882 (idx 33) tveeprom 0-0050: decoder processor is CX882 (idx 25) tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter cx88[0]: hauppauge eeprom: model=14109 input: cx88 IR (Hauppauge WinTV-HVR300 as /devices/pci0000:00/0000:00:08.0/0000: 01:06.0/input/input5 cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 19, latency: 64, mmio: 0xdf000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 ACPI: PCI Interrupt 0000:01:06.1[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 cx88[0]/1: CX88x/0: ALSA support for cx2388x boards cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:01:06.2[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 19, latency: 64, mmio: 0xdd000000 ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [SGRU] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:12.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 P DT 2007 cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000 TriMode Analog/D VB-S/DVB-T [card=53] cx88[0]/2: cx2388x based DVB/ATSC card DVB: registering new adapter (cx88[0]) DVB: registering frontend 0 (Conexant CX22702 DVB-T)... Current Kernel: uli:/tmp # cat /proc/version Linux version 2.6.24-rc5-default (root@uli) (gcc version 4.2.1 (SUSE Linux)) #1 SMP Fri Dec 14 20:18:09 CET 2007 Uli -- Ulrich Eckhardt http://www.uli-eckhardt.de Ein Blitzableiter auf dem Kirchturm ist das denkbar stärkste Misstrauensvotum gegen den lieben Gott. (Karl Krauss) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
