Hi, Holger ok - with your new patch. is it possible to implement FEC=AUTO mode for dvb-s2 ? goga@goga:/usr/src/szap2$ ./szap2 -c 19 -n1 -t2 -m8 -e0 reading channels from file '19' zapping to 1 'Pro7': sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid = 0x00ff, apid = 0x0103 sid = 0x27d8 (fec = -2147483648, mod = 8) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'Conexant CX24116/CX24118' DVB-S diseqc: sat_no:0 pol_vert:0 hi_band:1 cmd:e0 10 38 f3 wait:0 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 2122000, Srate = 22000000 (DVB-S2) do_tune: Frequency = 2122000, Srate = 22000000 (SET_PARAMS) status 01 | signal ea40 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ea80 | snr 0000 | ber 00000000 | unc 00000000 | goga@goga:/usr/src/szap2$ ./szap2 -c 19 -n1 -t2 -m8 -e2 reading channels from file '19' zapping to 1 'Pro7': sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid = 0x00ff, apid = 0x0103 sid = 0x27d8 (fec = 32, mod = 8) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'Conexant CX24116/CX24118' DVB-S diseqc: sat_no:0 pol_vert:0 hi_band:1 cmd:e0 10 38 f3 wait:0 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 2122000, Srate = 22000000 (DVB-S2) do_tune: Frequency = 2122000, Srate = 22000000 (SET_PARAMS) status 1f | signal ec80 | snr 84cc | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ea40 | snr 8199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ea80 | snr 8333 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ea40 | snr 8199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK > The attached patch adds support for HVR4000(lite) cards into the multiproto > tree from http://jusst.de/hg/multiproto . On my hardware (Hauppauge Nova HD > S2, no DiSEqC), this patch provides all functionallity required for watching > and recording DVB-S and DVB-S2 transmissions and switching between them > without further manual interaction on a multiproto-patched VDR 1.5.12. After > some hours of testing it seems to be stable so far. > > The patch is based on Darron Broads patch for v4l-dvb from 12/09/2007. Many > thanks to Darron and all other people involved. > > Regards, > Holger _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
