Hello, I am back under an "old" 2.6.23 just to test it : sysctl works now. With sysctl dev.cx24116.toneburst=1 I can somehow tune to some channels, like ./szap -p -a1 -n2 reading channels from file '/home/greg/.szap/channels.conf' zapping to 2 'ProSieben': sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x00ff, apid = 0x0100 sid = 0x0382 using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' t: 1196939665.526, c: 1, r: 0, a: ---------------------------------------------- t: 1196939665.526, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, SEC_TONE_OFF) t: 1196939665.608, c: 1, r: 0, a: ioctl(fd, FE_SET_VOLTAGE, v) (v = SEC_VOLTAGE_13) t: 1196939665.628, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &cmd->cmd) t: 1196939665.812, c: 1, r: 0, a: ioctl(fd, FE_DISEQC_SEND_BURST, b) (b = SEC_MINI_B) t: 1196939665.832, c: 1, r: 0, a: ioctl(fd, FE_SET_TONE, t) (t = SEC_TONE_ON) t: 1196939665.898, c: 1, r: 0, a: ioctl(fefd, FE_SET_FRONTEND, &tuneto) couldn't find pmt-pid for sid 0382 status 1f | signal d040 | snr b666 | ber 00000000 | unc 00000000 | FE_HAS_LOCK But with a non HVR-4000 cards it found the pmt-pid well : ./szap -p -a0 -n2 reading channels from file '/home/greg/.szap/channels.conf' zapping to 2 'ProSieben': sat 1, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x00ff, apid = 0x0100 sid = 0x0382 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' t: 1196939675.594, c: 0, r: 0, a: ---------------------------------------------- t: 1196939675.594, c: 0, r: 0, a: ioctl(fd, FE_SET_TONE, SEC_TONE_OFF) t: 1196939675.608, c: 0, r: 0, a: ioctl(fd, FE_SET_VOLTAGE, v) (v = SEC_VOLTAGE_13) t: 1196939675.631, c: 0, r: 0, a: ioctl(fd, FE_DISEQC_SEND_MASTER_CMD, &cmd->cmd) t: 1196939675.721, c: 0, r: 0, a: ioctl(fd, FE_DISEQC_SEND_BURST, b) (b = SEC_MINI_B) t: 1196939675.758, c: 0, r: 0, a: ioctl(fd, FE_SET_TONE, t) (t = SEC_TONE_ON) t: 1196939675.758, c: 0, r: 0, a: ioctl(fefd, FE_SET_FRONTEND, &tuneto) status 1f | signal b2c2 | snr e52f | ber 0000ce00 | unc 00000000 | FE_HAS_LOCK This card is really not so easy to make it working... -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
