Dear all, I am using a Nebula DigiTV USB-T (Zarlink MT352) on a openSuSE 10.3 box (AMD64X2). This works well with MythTV 0.20.2, except that MythTV itself is sufficiently buggy that it has always crashed within an hour of watching 'live' TV. For some reason, neither dvbscan or kdetv seem to be able to access the digital TV card. dvbscan complains that it cannot access the frontend, although the logs as below indicate that the frontend has been created. /dev/dvb/adapter0/scanner0, as well as other devices in adapter0, are present, and have appropriate permissions. In any case, running dvbscan as root does not help. kdetv also complains that it cannot find a TV device. For some reason, no v4l modules are loaded. Manually loading v4l modules does not help. Any idea how I can fix this? Cheerio, David. =============================================================== Nov 22 18:10:04 Vigor10 kernel: usb 3-1: new high speed USB device using ehci_hcd and address 3 Nov 22 18:10:04 Vigor10 kernel: usb 3-1: new device found, idVendor=0547, idProduct=0201 Nov 22 18:10:04 Vigor10 kernel: usb 3-1: new device strings: Mfr=0, Product=0, SerialNumber=0 Nov 22 18:10:04 Vigor10 kernel: usb 3-1: configuration #1 chosen from 1 choice Nov 22 18:10:04 Vigor10 kernel: dvb-usb: found a 'Nebula Electronics uDigiTV DVB-T USB2.0)' in cold state, will try to load a firmware Nov 22 18:10:04 Vigor10 kernel: dvb-usb: downloading firmware from file 'dvb-usb-digitv-02.fw' Nov 22 18:10:04 Vigor10 kernel: usbcore: registered new interface driver dvb_usb_digitv Nov 22 18:10:04 Vigor10 kernel: usb 3-1: USB disconnect, address 3 Nov 22 18:10:04 Vigor10 kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Nov 22 18:10:06 Vigor10 kernel: usb 3-1: new high speed USB device using ehci_hcd and address 4 Nov 22 18:10:06 Vigor10 kernel: usb 3-1: string descriptor 0 read error: -22 Nov 22 18:10:06 Vigor10 kernel: usb 3-1: string descriptor 0 read error: -22 Nov 22 18:10:06 Vigor10 kernel: usb 3-1: new device found, idVendor=0547, idProduct=0201 Nov 22 18:10:06 Vigor10 kernel: usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Nov 22 18:10:06 Vigor10 kernel: usb 3-1: configuration #1 chosen from 1 choice Nov 22 18:10:06 Vigor10 kernel: dvb-usb: found a 'Nebula Electronics uDigiTV DVB-T USB2.0)' in warm state. Nov 22 18:10:06 Vigor10 kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Nov 22 18:10:06 Vigor10 kernel: DVB: registering new adapter (Nebula Electronics uDigiTV DVB-T USB2.0)). Nov 22 18:10:06 Vigor10 kernel: DVB: registering frontend 0 (Zarlink MT352 DVB-T)... Nov 22 18:10:06 Vigor10 kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input6 Nov 22 18:10:06 Vigor10 kernel: dvb-usb: schedule remote query interval to 1000 msecs. Nov 22 18:10:06 Vigor10 kernel: dvb-usb: Nebula Electronics uDigiTV DVB-T USB2.0) successfully initialized and connected. =============================================================== _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
