Your failing channel is VHF channel 6 while your working channels are UHF. Is the Hauppauge Nova-T Stick supposed to work with VHF? Maybe an antenna or other reception-related problem with VHF? -Thierry -----Message d'origine----- De : linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx] De la part de Matthias Schwarzott Envoyé : mercredi 21 novembre 2007 11:41 À : linux-dvb@xxxxxxxxxxx Objet : Re: Tuning Regression on Hauppauge Nova-T Stick forjust one channel (driver dvb_usb_dib0700) On Mittwoch, 22. August 2007, Matthias Schwarzott wrote: > Hi there! > > My Hauppauge Nova-T Stick works for all but one frequency now. And this did > also work some time ago. > > Failing channel: > Das Erste;BR:184500000:B7Y0:T:0:513:514=deu:516:0:32:8468:12289:0 > > Some working channels: > > ZDF;ZDFmobil:578000000:C23D12M16B8T8G4Y0:T:0:545:546=deu,547=2ch:551:0:514: >8468:514:0 RTL Television,RTL;RTL > World:834000000:M32B8Y0:T:0:337:338=deu:343:0:16405:8468:13314:0 > SAT.1;ProSiebenSat.1:626000000:M32B8Y0:T:0:385:386=deu:391:0:16408:8468:130 >57:0 > ProSieben;ProSiebenSat.1:626000000:M32B8Y0:T:0:305:306=deu:311:0:16403:8468 >:13057:0 RTL2;RTL > World:834000000:M32B8Y0:T:0:353:354=deu:359:0:16406:8468:13314:0 kabel > eins;ProSiebenSat.1:626000000:M32B8Y0:T:0:161:162=deu:167:0:16394:8468:1305 >7:0 > > All other channels have frequencies above: 578 MHz and have a bandwidth of > 8Mhz, the failing is at 184MHz + bw of 7MHz. > > I can add some logs if needed (and I am telled which). > > Here some log of mt2060 module: > MT2060: IF1: 1220MHz > MT2060: PLL freq=184500kHz f_lo1=1404500kHz f_lo2=1183850kHz > MT2060: PLL div1=87 num1=50 div2=73 num2=8115 > MT2060: PLL [1..5]: 9c 57 23 fb 93 > > MT2060: IF1: 1220MHz > MT2060: PLL freq=578000kHz f_lo1=1798000kHz f_lo2=1183850kHz > MT2060: PLL div1=112 num1=24 div2=73 num2=8115 > MT2060: PLL [1..5]: 46 70 3 fb 93 > I updated to todays v4l-dvb and it still does not work :( dmesg log of module loading: dib0700: loaded with support for 5 different device-types dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware Device driver 5-6 lacks bus and class support for being resumed. dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. Device driver i2c-3 lacks bus and class support for being resumed. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick) Device driver i2c-4 lacks bus and class support for being resumed. DVB: registering frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)... MT2060: successfully identified (IF1 = 1220) input: IR-receiver inside an USB DVB receiver as /class/input/input15 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700 USB driver dvb_usb_dib0700 lacks resume support. So what can I do to get more light into this? Matthias -- Matthias Schwarzott (zzam) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
