Here is a patch against linux-2.6.22.1
----- Original ----
Sender: Patrick Boettcher <patrick.boettcher@xxxxxxx>
Receiver: Shuhao Chang <shuhao_chang@xxxxxxxxx>
CC: linux-dvb@xxxxxxxxxxx
Date: Mon, Oct 22 15:39:12 +0800
Subject: Re: is dib7070m supported?
Hello,
As you have received a development board from DiBcom you most likely have
a contact at DiBcom. Try to ask them to have a driver (for windows at
least).
The DiB7070M can be used in Linux with v4l-dvb but not without some work.
Have a look at dib0700_devices.c to find how the DiB7070P is implemented.
Patrick.
--
Mail: patrick.boettcher@xxxxxxx
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Wed, 17 Oct 2007, Shuhao Chang wrote:
> We got NIM7070MD(2 dib7070m + dib0700c usb bridge) board.
> My linux box didn't recognize it.
> is dib7070m supported?
>
> I found there is a dib7070p-based driver patch(01373a5c97ced83d4cb520f7e56c80454a198bfb) at linux git reposity.
> Does it works with dib7070m?
>
>
>
>
>
> ____________________________________________________________________________________
> ??????,?????? - ???? Yahoo!??????http://tw.info.yahoo.com/seal/index.html
Sender: Patrick Boettcher <patrick.boettcher@xxxxxxx>
Receiver: Shuhao Chang <shuhao_chang@xxxxxxxxx>
CC: linux-dvb@xxxxxxxxxxx
Date: Mon, Oct 22 15:39:12 +0800
Subject: Re: is dib7070m supported?
Hello,
As you have received a development board from DiBcom you most likely have
a contact at DiBcom. Try to ask them to have a driver (for windows at
least).
The DiB7070M can be used in Linux with v4l-dvb but not without some work.
Have a look at dib0700_devices.c to find how the DiB7070P is implemented.
Patrick.
--
Mail: patrick.boettcher@xxxxxxx
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Wed, 17 Oct 2007, Shuhao Chang wrote:
> We got NIM7070MD(2 dib7070m + dib0700c usb bridge) board.
> My linux box didn't recognize it.
> is dib7070m supported?
>
> I found there is a dib7070p-based driver patch(01373a5c97ced83d4cb520f7e56c80454a198bfb) at linux git reposity.
> Does it works with dib7070m?
>
>
>
>
>
> ____________________________________________________________________________________
> ??????,?????? - ???? Yahoo!??????http://tw.info.yahoo.com/seal/index.html
____________________________________________________________________________________
怎樣減少垃圾信？只要看到垃圾信，立即按下「這是垃圾信」按鈕，垃圾信剋星幫助你清除你信箱垃圾。
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/dvb-usb/Kconfig linux-2.6.22.1.nim7070md/drivers/media/dvb/dvb-usb/Kconfig
*** linux-2.6.22.1.vallina/drivers/media/dvb/dvb-usb/Kconfig Wed Oct 31 15:53:48 2007
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/dvb-usb/Kconfig Wed Nov 14 13:36:51 2007
*************** config DVB_USB_DIB0700
*** 74,79 ****
--- 74,80 ----
select DVB_DIB7000M
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_DIB0070
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
USB bridge is also present in devices having the DiB7700 DVB-T-USB
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/dvb-usb/dib0700_devices.c linux-2.6.22.1.nim7070md/drivers/media/dvb/dvb-usb/dib0700_devices.c
*** linux-2.6.22.1.vallina/drivers/media/dvb/dvb-usb/dib0700_devices.c Wed Oct 31 15:53:48 2007
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/dvb-usb/dib0700_devices.c Wed Nov 14 12:05:05 2007
***************
*** 12,23 ****
--- 12,28 ----
#include "dib7000m.h"
#include "dib7000p.h"
#include "mt2060.h"
+ #include "dib0070.h"
static int force_lna_activation;
module_param(force_lna_activation, int, 0644);
MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
"if applicable for the device (default: 0=automatic/off).");
+ struct dib0700_adapter_state {
+ int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
+ };
+
/* Hauppauge Nova-T 500
* has a LNA on GPIO0 which is enabled by setting 1 */
static struct mt2060_config bristol_mt2060_config[2] = {
*************** static int stk7700p_frontend_attach(stru
*** 244,250 ****
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
st->is_dib7000pc = 1;
} else
! adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
return adap->fe == NULL ? -ENODEV : 0;
}
--- 249,255 ----
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
st->is_dib7000pc = 1;
} else
! adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config, NULL, OUTMODE_MPEG2_FIFO);
return adap->fe == NULL ? -ENODEV : 0;
}
*************** static int stk7700p_tuner_attach(struct
*** 267,285 ****
st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
}
struct usb_device_id dib0700_usb_id_table[] = {
! { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
! { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
{ USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
! { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
--- 272,449 ----
st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
}
+ /* NIM7070MD */
+ static struct dibx000_agc_config dib7070_agc_config = {
+ BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
+ (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
+
+ 600, // inv_gain
+ 10, // time_stabiliz
+
+ 0, // alpha_level
+ 118, // thlock
+
+ 0, // wbd_inv
+ 3530, // wbd_ref
+ 1, // wbd_sel
+ 5, // wbd_alpha
+
+ 65535, // agc1_max
+ 0, // agc1_min
+
+ 65535, // agc2_max
+ 0, // agc2_min
+
+ 0, // agc1_pt1
+ 40, // agc1_pt2
+ 183, // agc1_pt3
+ 206, // agc1_slope1
+ 255, // agc1_slope2
+ 72, // agc2_pt1
+ 152, // agc2_pt2
+ 88, // agc2_slope1
+ 90, // agc2_slope2
+
+ 17, // alpha_mant
+ 27, // alpha_exp
+ 23, // beta_mant
+ 51, // beta_exp
+
+ 0, // perform_agc_softsplit
+ };
+
+ static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
+ 60000, 15000, // internal, sampling
+ 1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+ 0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+ (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+ (0 << 25) | 0, // ifreq = 0.000000 MHz
+ 20452225 // timf
+ };
+
+ static struct dib7000m_config nim7070md_dib7000m_config[2] = {
+ {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .mobile_mode = 1
+ }, {
+ .output_mpeg2_in_188_bytes = 0,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+
+ .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .mobile_mode = 1
+ }
+ };
+
+ static int nim7070md_frontend_attach(struct dvb_usb_adapter *adap)
+ {
+ struct dvb_frontend *fe;
+
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ dib7000m_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, nim7070md_dib7000m_config);
+
+ fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 0x82, &nim7070md_dib7000m_config[1], NULL, OUTMODE_DIVERSITY);
+ if (fe == NULL) {
+ return -ENODEV;
+ }
+ adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 0x80, &nim7070md_dib7000m_config[0], fe, OUTMODE_MPEG2_FIFO);
+ return adap->fe == NULL ? -ENODEV : 0;
+ }
+
+ static int dib7070m_tuner_reset(struct dvb_frontend *fe, int onoff)
+ {
+ int ret;
+
+ do {
+ ret = dib7000m_set_gpio(fe, 8, 0, !onoff);
+ } while ((fe = dib7000m_get_next_frontend(fe)) != NULL);
+ return ret;
+ }
+
+ static int dib7070m_tuner_sleep(struct dvb_frontend *fe, int onoff)
+ {
+ int ret;
+
+ do {
+ ret = dib7000m_set_gpio(fe, 9, 0, onoff);
+ } while ((fe = dib7000m_get_next_frontend(fe)) != NULL);
+ return ret;
+ }
+
+ static struct dib0070_config nim7070md_dib0070_config[2] = {
+ {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070m_tuner_reset,
+ .sleep = dib7070m_tuner_sleep,
+ .clock_khz = 12000,
+ .clock_pad_drive = 4
+ }, {
+ .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+ .reset = dib7070m_tuner_reset,
+ .sleep = dib7070m_tuner_sleep,
+ .clock_khz = 12000
+ }
+ };
+
+ static int nim7070md_tuner_attach(struct dvb_usb_adapter *adap)
+ {
+ struct dvb_frontend *fe = adap->fe;
+ struct i2c_adapter *tun_i2c;
+ int i = 0;
+
+ do {
+ tun_i2c = dib7000m_get_i2c_master(fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+ dvb_attach(dib0070_attach, fe, tun_i2c, &nim7070md_dib0070_config[i++]);
+ } while ((fe = dib7000m_get_next_frontend(fe)) != NULL);
+
+ return 0;
+ }
+
struct usb_device_id dib0700_usb_id_table[] = {
! /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
! /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
{ USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
! /* 10 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
! { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7070MD) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
*************** struct dvb_usb_device_properties dib0700
*** 372,377 ****
--- 536,562 ----
{ NULL },
},
}
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .frontend_attach = nim7070md_frontend_attach,
+ .tuner_attach = nim7070md_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+ .size_of_priv = sizeof(struct dib0700_adapter_state)
+ }
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom NIM7070MD reference design",
+ { &dib0700_usb_id_table[11], NULL },
+ { NULL },
+ }
+ }
}
};
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/dvb-usb/dvb-usb-ids.h linux-2.6.22.1.nim7070md/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
*** linux-2.6.22.1.vallina/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Wed Oct 31 15:53:48 2007
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Wed Oct 31 10:28:11 2007
***************
*** 61,66 ****
--- 61,67 ----
#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7
#define USB_PID_DIBCOM_STK7700P 0x1e14
#define USB_PID_DIBCOM_STK7700P_PC 0x1e78
+ #define USB_PID_DIBCOM_NIM7070MD 0x1ec6
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
#define USB_PID_DPOSH_M9206_COLD 0x9206
#define USB_PID_DPOSH_M9206_WARM 0xa090
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/frontends/Kconfig linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/Kconfig
*** linux-2.6.22.1.vallina/drivers/media/dvb/frontends/Kconfig Wed Oct 31 15:53:48 2007
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/Kconfig Wed Nov 14 13:39:10 2007
*************** config DVB_TUNER_MT2060
*** 322,327 ****
--- 322,336 ----
help
A driver for the silicon IF tuner MT2060 from Microtune.
+ config DVB_TUNER_DIB0070
+ tristate "DiBcom DiB0070 silicon base-band tuner"
+ depends on I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A driver for the silicon baseband tuner DiB0070 from DiBcom.
+ This device is only used inside a SiP called togther with a
+ demodulator for now.
+
comment "Miscellaneous devices"
depends on DVB_CORE
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/frontends/Makefile linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/Makefile
*** linux-2.6.22.1.vallina/drivers/media/dvb/frontends/Makefile Wed Oct 31 15:53:48 2007
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/Makefile Wed Nov 14 13:41:35 2007
*************** obj-$(CONFIG_DVB_TDA10086) += tda10086.o
*** 40,44 ****
--- 40,45 ----
obj-$(CONFIG_DVB_TDA826X) += tda826x.o
obj-$(CONFIG_DVB_TDA827X) += tda827x.o
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
+ obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o
obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
obj-$(CONFIG_DVB_TUA6100) += tua6100.o
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib0070.c linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib0070.c
*** linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib0070.c Thu Jan 1 08:00:00 1970
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib0070.c Wed Oct 31 15:52:01 2007
***************
*** 0 ****
--- 1,580 ----
+ /*
+ * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
+ *
+ * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+ #include <linux/kernel.h>
+ #include <linux/i2c.h>
+
+ #include "dvb_frontend.h"
+
+ #include "dib0070.h"
+ #include "dibx000_common.h"
+
+ static int debug;
+ module_param(debug, int, 0644);
+ MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+ #define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB0070: "); printk(args); printk("\n"); } } while (0)
+
+ #define DIB0070_P1D 0x00
+ #define DIB0070_P1F 0x01
+ #define DIB0070_P1G 0x03
+ #define DIB0070S_P1A 0x02
+
+ struct dib0070_state {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend *fe;
+ const struct dib0070_config *cfg;
+ u16 wbd_ff_offset;
+ u8 revision;
+ };
+
+ static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
+ {
+ u8 b[2];
+ struct i2c_msg msg[2] = {
+ { .addr = state->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 },
+ { .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b, .len = 2 },
+ };
+ if (i2c_transfer(state->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "DiB0070 I2C read failed\n");
+ return 0;
+ }
+ return (b[0] << 8) | b[1];
+ }
+
+ static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
+ {
+ u8 b[3] = { reg, val >> 8, val & 0xff };
+ struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 };
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "DiB0070 I2C write failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+ }
+
+ #define HARD_RESET(state) do { if (state->cfg->reset) { state->cfg->reset(state->fe,1); msleep(10); state->cfg->reset(state->fe,0); msleep(10); } } while (0)
+
+ static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+ {
+ struct dib0070_state *st = fe->tuner_priv;
+ u16 tmp = 0;
+ tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
+
+ switch(BW_INDEX_TO_KHZ(ch->u.ofdm.bandwidth)) {
+ case 8000:
+ tmp |= (0 << 14);
+ break;
+ case 7000:
+ tmp |= (1 << 14);
+ break;
+ case 6000:
+ tmp |= (2 << 14);
+ break;
+ case 5000:
+ default:
+ tmp |= (3 << 14);
+ break;
+ }
+ dib0070_write_reg(st, 0x02, tmp);
+ return 0;
+ }
+
+ static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
+ {
+ int8_t captrim, fcaptrim, step_sign, step;
+ u16 adc, adc_diff = 3000;
+
+
+
+ dib0070_write_reg(st, 0x0f, 0xed10);
+ dib0070_write_reg(st, 0x17, 0x0034);
+
+ dib0070_write_reg(st, 0x18, 0x0032);
+ msleep(2);
+
+ step = captrim = fcaptrim = 64;
+
+ do {
+ step /= 2;
+ dib0070_write_reg(st, 0x14, LO4 | captrim);
+ msleep(1);
+ adc = dib0070_read_reg(st, 0x19);
+
+ dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", captrim, adc, (u32) adc*(u32)1800/(u32)1024);
+
+ if (adc >= 400) {
+ adc -= 400;
+ step_sign = -1;
+ } else {
+ adc = 400 - adc;
+ step_sign = 1;
+ }
+
+ if (adc < adc_diff) {
+ dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", captrim, adc, adc_diff);
+ adc_diff = adc;
+ fcaptrim = captrim;
+
+
+
+ }
+ captrim += (step_sign * step);
+ } while (step >= 1);
+
+ dib0070_write_reg(st, 0x14, LO4 | fcaptrim);
+ dib0070_write_reg(st, 0x18, 0x07ff);
+ }
+
+ #define LPF 100 // define for the loop filter 100kHz by default 16-07-06
+ #define LO4_SET_VCO_HFDIV(l, v, h) l |= ((v) << 11) | ((h) << 7)
+ #define LO4_SET_SD(l, s) l |= ((s) << 14) | ((s) << 12)
+ #define LO4_SET_CTRIM(l, c) l |= (c) << 10
+ static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
+ {
+ struct dib0070_state *st = fe->tuner_priv;
+ u32 freq = ch->frequency/1000 + (BAND_OF_FREQUENCY(ch->frequency/1000) == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
+
+ u8 band = BAND_OF_FREQUENCY(freq), c;
+
+ /*******************VCO***********************************/
+ u16 lo4 = 0;
+
+ u8 REFDIV, PRESC = 2;
+ u32 FBDiv, Rest, FREF, VCOF_kHz;
+ u16 Num, Den;
+ /*******************FrontEnd******************************/
+ u16 value = 0;
+
+ dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
+
+
+ dib0070_write_reg(st, 0x17, 0x30);
+
+ dib0070_set_bandwidth(fe, ch); /* c is used as HF */
+ switch (st->revision) {
+ case DIB0070S_P1A:
+ switch (band) {
+ case BAND_LBAND:
+ LO4_SET_VCO_HFDIV(lo4, 1, 1);
+ c = 2;
+ break;
+ case BAND_SBAND:
+ LO4_SET_VCO_HFDIV(lo4, 0, 0);
+ LO4_SET_CTRIM(lo4, 1);;
+ c = 1;
+ break;
+ case BAND_UHF:
+ default:
+ if (freq < 570000) {
+ LO4_SET_VCO_HFDIV(lo4, 1, 3);
+ PRESC = 6; c = 6;
+ } else if (freq < 680000) {
+ LO4_SET_VCO_HFDIV(lo4, 0, 2);
+ c = 4;
+ } else {
+ LO4_SET_VCO_HFDIV(lo4, 1, 2);
+ c = 4;
+ }
+ break;
+ } break;
+
+ case DIB0070_P1G:
+ case DIB0070_P1F:
+ default:
+ switch (band) {
+ case BAND_FM:
+ LO4_SET_VCO_HFDIV(lo4, 0, 7);
+ c = 24;
+ break;
+ case BAND_LBAND:
+ LO4_SET_VCO_HFDIV(lo4, 1, 0);
+ c = 2;
+ break;
+ case BAND_VHF:
+ if (freq < 180000) {
+ LO4_SET_VCO_HFDIV(lo4, 0, 3);
+ c = 16;
+ } else if (freq < 190000) {
+ LO4_SET_VCO_HFDIV(lo4, 1, 3);
+ c = 16;
+ } else {
+ LO4_SET_VCO_HFDIV(lo4, 0, 6);
+ c = 12;
+ }
+ break;
+
+ case BAND_UHF:
+ default:
+ if (freq < 570000) {
+ LO4_SET_VCO_HFDIV(lo4, 1, 5);
+ c = 6;
+ } else if (freq < 700000) {
+ LO4_SET_VCO_HFDIV(lo4, 0, 1);
+ c = 4;
+ } else {
+ LO4_SET_VCO_HFDIV(lo4, 1, 1);
+ c = 4;
+ }
+ break;
+ }
+ break;
+ }
+
+ dprintk( "HFDIV code: %hd", (lo4 >> 7) & 0xf);
+ dprintk( "VCO = %hd", (lo4 >> 11) & 0x3);
+
+
+ VCOF_kHz = (c * freq) * 2;
+ dprintk( "VCOF in kHz: %d ((%hd*%d) << 1))",VCOF_kHz, c, freq);
+
+ switch (band) {
+ case BAND_VHF:
+ REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
+ break;
+ case BAND_FM:
+ REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
+ break;
+ default:
+ REFDIV = (u8) ( st->cfg->clock_khz / 10000);
+ break;
+ }
+ FREF = st->cfg->clock_khz / REFDIV;
+
+ dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
+
+
+
+ switch (st->revision) {
+ case DIB0070S_P1A:
+ FBDiv = (VCOF_kHz / PRESC / FREF);
+ Rest = (VCOF_kHz / PRESC) - FBDiv * FREF;
+ break;
+
+ case DIB0070_P1G:
+ case DIB0070_P1F:
+ default:
+ FBDiv = (freq / (FREF / 2));
+ Rest = 2 * freq - FBDiv * FREF;
+ break;
+ }
+
+
+ if (Rest < LPF) Rest = 0;
+ else if (Rest < 2 * LPF) Rest = 2 * LPF;
+ else if (Rest > (FREF - LPF)) { Rest = 0 ; FBDiv += 1; }
+ else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
+ Rest = (Rest * 6528) / (FREF / 10);
+ dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
+
+ Num = 0;
+ Den = 1;
+
+ if (Rest > 0) {
+ LO4_SET_SD(lo4, 1);
+ Den = 255;
+ Num = (u16)Rest;
+ }
+ dprintk( "Num: %hd, Den: %hd, SD: %hd",Num, Den, (lo4 >> 12) & 0x1);
+
+
+
+ dib0070_write_reg(st, 0x11, (u16)FBDiv);
+
+
+ dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
+
+
+ dib0070_write_reg(st, 0x13, Num);
+
+
+ value = 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001;
+
+ switch (band) {
+ case BAND_UHF: value |= 0x4000 | 0x0800; break;
+ case BAND_LBAND: value |= 0x2000 | 0x0400; break;
+ default: value |= 0x8000 | 0x1000; break;
+ }
+ dib0070_write_reg(st, 0x20, value);
+
+ dib0070_captrim(st, lo4);
+ if (st->revision == DIB0070S_P1A) {
+ if (band == BAND_SBAND)
+ dib0070_write_reg(st, 0x15, 0x16e2);
+ else
+ dib0070_write_reg(st, 0x15, 0x56e5);
+ }
+
+
+
+ switch (band) {
+ case BAND_UHF: value = 0x7c82; break;
+ case BAND_LBAND: value = 0x7c84; break;
+ default: value = 0x7c81; break;
+ }
+ dib0070_write_reg(st, 0x0f, value);
+ dib0070_write_reg(st, 0x06, 0x3fff);
+
+ /* Front End */
+ /* c == TUNE, value = SWITCH */
+ c = 0;
+ value = 0;
+ switch (band) {
+ case BAND_FM:
+ c = 0; value = 1;
+ break;
+
+ case BAND_VHF:
+ if (freq <= 180000) c = 0;
+ else if (freq <= 188200) c = 1;
+ else if (freq <= 196400) c = 2;
+ else c = 3;
+ value = 1;
+ break;
+
+ case BAND_LBAND:
+ if (freq <= 1500000) c = 0;
+ else if (freq <= 1600000) c = 1;
+ else c = 3;
+ break;
+
+ case BAND_SBAND:
+ c = 7;
+ dib0070_write_reg(st, 0x1d,0xFFFF);
+ break;
+
+ case BAND_UHF:
+ default:
+ if (st->cfg->flip_chip) {
+ if (freq <= 550000) c = 0;
+ else if (freq <= 590000) c = 1;
+ else if (freq <= 666000) c = 3;
+ else c = 5;
+ } else {
+ if (freq <= 550000) c = 2;
+ else if (freq <= 650000) c = 3;
+ else if (freq <= 750000) c = 5;
+ else if (freq <= 850000) c = 6;
+ else c = 7;
+ }
+ value = 2;
+ break;
+ }
+
+ /* default: LNA_MATCH=7, BIAS=3 */
+ dib0070_write_reg(st, 0x07, (value << 11) | (7 << 8) | (c << 3) | (3 << 0));
+ dib0070_write_reg(st, 0x08, (c << 10) | (3 << 7) | (127));
+ dib0070_write_reg(st, 0x0d, 0x0d80);
+
+
+ dib0070_write_reg(st, 0x18, 0x07ff);
+ dib0070_write_reg(st, 0x17, 0x0033);
+
+ return 0;
+ }
+
+ static int dib0070_wakeup(struct dvb_frontend *fe)
+ {
+ struct dib0070_state *st = fe->tuner_priv;
+ if (st->cfg->sleep)
+ st->cfg->sleep(fe, 0);
+ return 0;
+ }
+
+ static int dib0070_sleep(struct dvb_frontend *fe)
+ {
+ struct dib0070_state *st = fe->tuner_priv;
+ if (st->cfg->sleep)
+ st->cfg->sleep(fe, 1);
+ return 0;
+ }
+
+ static u16 dib0070_p1f_defaults[] =
+
+ {
+ 7, 0x02,
+ 0x0008,
+ 0x0000,
+ 0x0000,
+ 0x0000,
+ 0x0000,
+ 0x0002,
+ 0x0100,
+
+ 3, 0x0d,
+ 0x0d80,
+ 0x0001,
+ 0x0000,
+
+ 4, 0x11,
+ 0x0000,
+ 0x0103,
+ 0x0000,
+ 0x0000,
+
+ 3, 0x16,
+ 0x0004 | 0x0040,
+ 0x0030,
+ 0x07ff,
+
+ 6, 0x1b,
+ 0x4112,
+ 0xff00,
+ 0xc07f,
+ 0x0000,
+ 0x0180,
+ 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
+
+ 0,
+ };
+
+ static void dib0070_wbd_calibration(struct dib0070_state *state)
+ {
+ u16 wbd_offs;
+ dib0070_write_reg(state, 0x0f, 0x6d81);
+ dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
+ msleep(9);
+ wbd_offs = dib0070_read_reg(state, 0x19);
+ dib0070_write_reg(state, 0x20, 0);
+ state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2);
+ dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset);
+ }
+
+ u16 dib0070_wbd_offset(struct dvb_frontend *fe)
+ {
+ struct dib0070_state *st = fe->tuner_priv;
+ return st->wbd_ff_offset;
+ }
+
+ EXPORT_SYMBOL(dib0070_wbd_offset);
+ static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
+ {
+ struct dib0070_state *state = fe->tuner_priv;
+ u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
+ dprintk( "CTRL_LO5: 0x%x", lo5);
+ return dib0070_write_reg(state, 0x15, lo5);
+ }
+
+ #define pgm_read_word(w) (*w)
+ static int dib0070_reset(struct dib0070_state *state)
+ {
+ u16 l, r, *n;
+
+ HARD_RESET(state);
+
+
+ #ifndef FORCE_SBAND_TUNER
+ if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
+ state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
+ else
+ #endif
+ state->revision = DIB0070S_P1A;
+
+ /* P1F or not */
+ dprintk( "Revision: %x", state->revision);
+
+ if (state->revision == DIB0070_P1D) {
+ dprintk( "Error: this driver is not to be used meant for P1D or earlier");
+ return -EINVAL;
+ }
+
+ n = (u16 *) dib0070_p1f_defaults;
+ l = pgm_read_word(n++);
+ while (l) {
+ r = pgm_read_word(n++);
+ do {
+ dib0070_write_reg(state, (u8)r, pgm_read_word(n++));
+ r++;
+ } while (--l);
+ l = pgm_read_word(n++);
+ }
+
+ if (state->cfg->force_crystal_mode != 0)
+ r = state->cfg->force_crystal_mode;
+ else if (state->cfg->clock_khz >= 24000)
+ r = 1;
+ else
+ r = 2;
+
+ r |= state->cfg->osc_buffer_state << 3;
+
+ dib0070_write_reg(state, 0x10, r);
+ dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 4));
+
+ if (state->cfg->invert_iq) {
+ r = dib0070_read_reg(state, 0x02) & 0xffdf;
+ dib0070_write_reg(state, 0x02, r | (1 << 5));
+ }
+
+
+ if (state->revision == DIB0070S_P1A)
+ dib0070_set_ctrl_lo5(state->fe, 4, 7, 3, 1);
+ else
+ dib0070_set_ctrl_lo5(state->fe, 4, 4, 2, 0);
+
+ dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
+ return 0;
+ }
+
+
+ static int dib0070_release(struct dvb_frontend *fe)
+ {
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+ }
+
+ static struct dvb_tuner_ops dib0070_ops = {
+ .info = {
+ .name = "DiBcom DiB0070",
+ .frequency_min = 45000000,
+ .frequency_max = 860000000,
+ .frequency_step = 1000,
+ },
+ .release = dib0070_release,
+
+ .init = dib0070_wakeup,
+ .sleep = dib0070_sleep,
+ .set_params = dib0070_tune_digital,
+ // .get_frequency = dib0070_get_frequency,
+ // .get_bandwidth = dib0070_get_bandwidth
+ };
+
+ struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
+ {
+ struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->cfg = cfg;
+ state->i2c = i2c;
+ state->fe = fe;
+ fe->tuner_priv = state;
+
+ if (dib0070_reset(state) != 0)
+ goto free_mem;
+
+ dib0070_wbd_calibration(state);
+
+ printk(KERN_INFO "DiB0070: successfully identified\n");
+ memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = state;
+ return fe;
+
+ free_mem:
+ kfree(state);
+ fe->tuner_priv = NULL;
+ return NULL;
+ }
+ EXPORT_SYMBOL(dib0070_attach);
+
+ MODULE_AUTHOR("Patrick Boettcher <pboettcher@xxxxxxxxx>");
+ MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner");
+ MODULE_LICENSE("GPL");
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib0070.h linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib0070.h
*** linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib0070.h Thu Jan 1 08:00:00 1970
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib0070.h Wed Oct 31 10:25:34 2007
***************
*** 0 ****
--- 1,44 ----
+ /*
+ * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
+ *
+ * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+ #ifndef DIB0070_H
+ #define DIB0070_H
+
+ struct dvb_frontend;
+ struct i2c_adapter;
+
+ #define DEFAULT_DIB0070_I2C_ADDRESS 0x60
+
+ struct dib0070_config {
+ u8 i2c_address;
+
+ /* tuner pins controlled externally */
+ int (*reset) (struct dvb_frontend *, int);
+ int (*sleep) (struct dvb_frontend *, int);
+
+ /* offset in kHz */
+ int freq_offset_khz_uhf;
+ int freq_offset_khz_vhf;
+
+ u8 osc_buffer_state; /* 0= normal, 1= tri-state */
+ u32 clock_khz;
+ u8 clock_pad_drive; /* (Drive + 1) * 2mA */
+
+ u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */
+
+ u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
+
+ u8 flip_chip;
+ };
+
+ extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
+ extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
+ extern u16 dib0070_wbd_offset(struct dvb_frontend *);
+
+ #endif
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib7000m.c linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib7000m.c
*** linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib7000m.c Wed Oct 31 15:53:43 2007
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib7000m.c Wed Nov 14 11:32:49 2007
*************** struct dib7000m_state {
*** 40,46 ****
--- 40,51 ----
struct dibx000_agc_config *current_agc;
u32 timf;
+ u16 gpio_dir;
+ u16 gpio_val;
+
u16 revision;
+ struct dvb_frontend *next_fe;
+ int output_mode;
};
enum dib7000m_power_mode {
*************** static int dib7000m_reset_gpio(struct di
*** 358,363 ****
--- 363,390 ----
return 0;
}
+ static int dib7000m_cfg_gpio(struct dib7000m_state *st, u8 num, u8 dir, u8 val)
+ {
+ st->gpio_dir = dib7000m_read_word(st, 773);
+ st->gpio_dir &= ~(1 << num); /* reset the direction bit */
+ st->gpio_dir |= (dir & 0x1) << num; /* set the new direction */
+ dib7000m_write_word(st, 773, st->gpio_dir);
+
+ st->gpio_val = dib7000m_read_word(st, 781);
+ st->gpio_val &= ~(1 << num); /* reset the direction bit */
+ st->gpio_val |= (val & 0x01) << num; /* set the new value */
+ dib7000m_write_word(st, 774, st->gpio_val);
+
+ return 0;
+ }
+
+ int dib7000m_set_gpio(struct dvb_frontend *demod, u8 num, u8 dir, u8 val)
+ {
+ struct dib7000m_state *state = demod->demodulator_priv;
+ return dib7000m_cfg_gpio(state, num, dir, val);
+ }
+ EXPORT_SYMBOL(dib7000m_set_gpio);
+
static int dib7000m_demod_reset(struct dib7000m_state *state)
{
dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
*************** static void dib7000m_set_channel(struct
*** 579,584 ****
--- 606,618 ----
else
value |= 0;
dib7000m_write_word(state, 266 + state->reg_offs, value);
+ if (state->output_mode == OUTMODE_MPEG2_FIFO) {
+ dib7000m_write_word(state, 263 + state->reg_offs, 6);
+ dib7000m_write_word(state, 264 + state->reg_offs, 6);
+ } else if (state->output_mode == OUTMODE_DIVERSITY) {
+ dib7000m_write_word(state, 263 + state->reg_offs, 1);
+ dib7000m_write_word(state, 264 + state->reg_offs, 0);
+ }
/* channel estimation fine configuration */
switch (ch->nqam) {
*************** static int dib7000m_init(struct dvb_fron
*** 863,868 ****
--- 897,912 ----
return ret;
}
+ static int dib7000m_init_links(struct dvb_frontend *demod)
+ {
+ int ret;
+
+ do {
+ ret = dib7000m_init(demod);
+ } while ((demod = dib7000m_get_next_frontend(demod)) != NULL);
+ return ret;
+ }
+
static int dib7000m_sleep(struct dvb_frontend *demod)
{
struct dib7000m_state *st = demod->demodulator_priv;
*************** static int dib7000m_sleep(struct dvb_fro
*** 872,877 ****
--- 916,931 ----
dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
}
+ static int dib7000m_sleep_links(struct dvb_frontend *demod)
+ {
+ int ret;
+
+ do {
+ ret = dib7000m_sleep(demod);
+ } while ((demod = dib7000m_get_next_frontend(demod)) != NULL);
+ return ret;
+ }
+
static int dib7000m_identify(struct dib7000m_state *state)
{
u16 value;
*************** static int dib7000m_get_frontend(struct
*** 962,967 ****
--- 1016,1032 ----
return 0;
}
+ static int dib7000m_get_frontend_links(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+ {
+ int ret;
+
+ do {
+ ret = dib7000m_get_frontend(fe, fep);
+ } while ((fe = dib7000m_get_next_frontend(fe)) != NULL);
+ return ret;
+ }
+
static int dib7000m_set_frontend(struct dvb_frontend* fe,
struct dvb_frontend_parameters *fep)
{
*************** static int dib7000m_set_frontend(struct
*** 998,1008 ****
}
/* make this a config parameter */
! dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
return dib7000m_tune(fe, &ch);
}
static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
struct dib7000m_state *state = fe->demodulator_priv;
--- 1063,1084 ----
}
/* make this a config parameter */
! dib7000m_set_output_mode(state, state->output_mode);
return dib7000m_tune(fe, &ch);
}
+ static int dib7000m_set_frontend_links(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *fep)
+ {
+ int ret;
+
+ do {
+ ret = dib7000m_set_frontend(fe, fep);
+ } while ((fe = dib7000m_get_next_frontend(fe)) != NULL);
+ return ret;
+ }
+
static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
struct dib7000m_state *state = fe->demodulator_priv;
*************** static int dib7000m_read_status(struct d
*** 1018,1024 ****
*stat |= FE_HAS_VITERBI;
if (lock & 0x0010)
*stat |= FE_HAS_SYNC;
! if (lock & 0x0008)
*stat |= FE_HAS_LOCK;
return 0;
--- 1094,1100 ----
*stat |= FE_HAS_VITERBI;
if (lock & 0x0010)
*stat |= FE_HAS_SYNC;
! if (lock & 0x0008 || lock & 0x0001)
*stat |= FE_HAS_LOCK;
return 0;
*************** static void dib7000m_release(struct dvb_
*** 1065,1070 ****
--- 1141,1153 ----
kfree(st);
}
+ static void dib7000m_release_links(struct dvb_frontend *demod)
+ {
+ do {
+ dib7000m_release(demod);
+ } while ((demod = dib7000m_get_next_frontend(demod)) != NULL);
+ }
+
struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
{
struct dib7000m_state *st = demod->demodulator_priv;
*************** int dib7000m_i2c_enumeration(struct i2c_
*** 1118,1125 ****
}
EXPORT_SYMBOL(dib7000m_i2c_enumeration);
static struct dvb_frontend_ops dib7000m_ops;
! struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg)
{
struct dvb_frontend *demod;
struct dib7000m_state *st;
--- 1201,1214 ----
}
EXPORT_SYMBOL(dib7000m_i2c_enumeration);
+ struct dvb_frontend * dib7000m_get_next_frontend(struct dvb_frontend *fe) {
+ struct dib7000m_state *st = (struct dib7000m_state *)fe->demodulator_priv;
+ return st->next_fe;
+ }
+ EXPORT_SYMBOL(dib7000m_get_next_frontend);
+
static struct dvb_frontend_ops dib7000m_ops;
! struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg, struct dvb_frontend *fe, int mode)
{
struct dvb_frontend *demod;
struct dib7000m_state *st;
*************** struct dvb_frontend * dib7000m_attach(st
*** 1130,1135 ****
--- 1219,1226 ----
memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config));
st->i2c_adap = i2c_adap;
st->i2c_addr = i2c_addr;
+ st->next_fe = fe;
+ st->output_mode = mode;
demod = &st->demod;
demod->demodulator_priv = st;
*************** static struct dvb_frontend_ops dib7000m_
*** 1170,1183 ****
FE_CAN_HIERARCHY_AUTO,
},
! .release = dib7000m_release,
! .init = dib7000m_init,
! .sleep = dib7000m_sleep,
! .set_frontend = dib7000m_set_frontend,
.get_tune_settings = dib7000m_fe_get_tune_settings,
! .get_frontend = dib7000m_get_frontend,
.read_status = dib7000m_read_status,
.read_ber = dib7000m_read_ber,
--- 1261,1274 ----
FE_CAN_HIERARCHY_AUTO,
},
! .release = dib7000m_release_links,
! .init = dib7000m_init_links,
! .sleep = dib7000m_sleep_links,
! .set_frontend = dib7000m_set_frontend_links,
.get_tune_settings = dib7000m_fe_get_tune_settings,
! .get_frontend = dib7000m_get_frontend_links,
.read_status = dib7000m_read_status,
.read_ber = dib7000m_read_ber,
diff -rpN linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib7000m.h linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib7000m.h
*** linux-2.6.22.1.vallina/drivers/media/dvb/frontends/dib7000m.h Wed Jul 11 02:56:30 2007
--- linux-2.6.22.1.nim7070md/drivers/media/dvb/frontends/dib7000m.h Thu Nov 1 19:41:07 2007
*************** struct dib7000m_config {
*** 38,48 ****
#define DEFAULT_DIB7000M_I2C_ADDRESS 18
! extern struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg);
extern struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
/* TODO
- extern INT dib7000m_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
extern INT dib7000m_enable_vbg_voltage(struct dibDemod *demod);
extern void dib7000m_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
extern USHORT dib7000m_get_current_agc_global(struct dibDemod *demod);
--- 38,52 ----
#define DEFAULT_DIB7000M_I2C_ADDRESS 18
! extern struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg, struct dvb_frontend *fe, int mode);
! extern int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[]);
!
extern struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+ extern int dib7000m_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
+
+ extern struct dvb_frontend * dib7000m_get_next_frontend(struct dvb_frontend *fe);
/* TODO
extern INT dib7000m_enable_vbg_voltage(struct dibDemod *demod);
extern void dib7000m_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
extern USHORT dib7000m_get_current_agc_global(struct dibDemod *demod);
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
