Hi all,
for a while, I haven't used my Hauppauge Nova-S-Plus which used to work
fine. Now, it doesn't :-(
Whenever I try to tune it, it fails:
# scan -vvv /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
DiSEqC: switch pos 0, 13V, hiband (index 2)
diseqc_send_msg:59: DiSEqC: e0 10 38 f1 00 00
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
DiSEqC: switch pos 0, 13V, hiband (index 2)
diseqc_send_msg:59: DiSEqC: e0 10 38 f1 00 00
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
The cable is fine and a satellite finder indicates a signal. The LNB is
a quattro-switch-type and the other receivers (a digital twin and an
analogue one) work fine as well.
Operating system is Debian SID aka unstable, kernel 2.6.22 and 2.6.23. I
also tried Knoppix 5.2.
# cat /proc/version
Linux version 2.6.22-3-k7 (Debian 2.6.22-5) (maks@xxxxxxxxxx) (gcc
version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Mon Oct 22
22:51:54 UTC 2007
scan is from dvb-utils 1.1.1-3
# lspci
...
00:0f.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
00:0f.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [Audio Port] (rev 05)
00:0f.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
00:0f.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [IR Port] (rev 05)
...
# dmesg
...
cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S
[card=37,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
tveeprom 1-0050: Hauppauge model 92001, rev B1B1, serial# 247072
tveeprom 1-0050: MAC address is 00-0D-FE-03-C5-20
tveeprom 1-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 1-0050: audio processor is CX883 (idx 32)
tveeprom 1-0050: decoder processor is CX883 (idx 22)
tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=92001
input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input3
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
drivers/media/video/ov511.c: Sensor is an OV7620
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
cx88[0]/2: found at 0000:00:0f.2, rev: 5, irq: 11, latency: 32, mmio:
0xea000000
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
cx88[0]/0: found at 0000:00:0f.0, rev: 5, irq: 11, latency: 32, mmio:
0xe8000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S
[card=37]
cx88[0]/2: cx2388x based dvb card
drivers/media/video/ov511.c: Device at usb-0000:00:11.2-2 registered to
minor 1
usbcore: registered new interface driver ov511
drivers/media/video/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
Any ideas?
Thanks in advance.
Chris.
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
