Igor Nikanov wrote: > Hi > > 1) my hvr4000 with drivers from http://dev.kewl.org/hvr4000/hg/stoth/ > can't lock some dvb-s transponders with high SR (more than 44000). SS1 on VDR, Dreambox 7000 work with > this SR without any problem. (BTW, with low SR hvr4000 works very well) > > For example, > > Express 53E > > # scan 53 -v > scanning 53 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 11044000 V 44953000 3 > >>>> tune to: 11044:v:0:44953 > DiSEqC: switch pos 0, 13V, loband (index 0) > DVB-S IF freq is 1294000 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 > WARNING: >>> tuning failed!!! >>>> tune to: 11044:v:0:44953 (tuning failed) > DiSEqC: switch pos 0, 13V, loband (index 0) > DVB-S IF freq is 1294000 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x01 > WARNING: >>> tuning failed!!! >>>> tune to: 11096:v:0:6400 > > the same situation with Express 80E > > # scan 80 -v > scanning 80 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 10973000 V 4444000 3 > initial transponder 10991000 V 4444000 3 > initial transponder 11044000 H 44948000 5 > initial transponder 11606000 V 44948000 5 >>>> tune to: 10973:v:0:4444 > DiSEqC: switch pos 0, 13V, loband (index 0) > DVB-S IF freq is 1223000 >>>> tuning status == 0x1f > PAT > PMT 0x1079 for service 0x0001 > SDT (actual TS) > 0x0000 0x0001: pmt_pid 0x1079 Scopus Network Technologies -- ENISEY-REGION (running) > NIT (actual TS) > Network Name 'Scopus' >>>> tune to: 10991:v:0:4444 > DiSEqC: switch pos 0, 13V, loband (index 0) > DVB-S IF freq is 1241000 >>>> tuning status == 0x1f > PAT > PMT 0x0400 for service 0x0014 > PMT 0x0200 for service 0x0012 > SDT (actual TS) > 0x0000 0x0012: pmt_pid 0x0200 CRCTRC-11 -- OTC (running) > WARNING: filter timeout pid 0x0500 > WARNING: filter timeout pid 0x0010 >>>> tune to: 11044:h:0:44948 > DiSEqC: switch pos 0, 18V, loband (index 1) > DVB-S IF freq is 1294000 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 > WARNING: >>> tuning failed!!! >>>> tune to: 11044:h:0:44948 (tuning failed) > DiSEqC: switch pos 0, 18V, loband (index 1) > DVB-S IF freq is 1294000 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x01 > WARNING: >>> tuning failed!!! >>>> tune to: 11606:v:0:44948 > DiSEqC: switch pos 0, 13V, loband (index 0) > DVB-S IF freq is 1856000 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x01 >>>> tuning status == 0x01 > WARNING: >>> tuning failed!!! >>>> tune to: 11606:v:0:44948 (tuning failed) > DiSEqC: switch pos 0, 13V, loband (index 0) > DVB-S IF freq is 1856000 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x03 >>>> tuning status == 0x01 >>>> tuning status == 0x03 >>>> tuning status == 0x03 > WARNING: >>> tuning failed!!! > dumping lists (4 services) > Done. > > > 2) My diseqc switch didn't operate by A/A input with diseqc commands from hvr4000. >>>> tune to: 11044:v:0:44953 > DiSEqC: switch pos 0, 13V, loband (index 0) > >>>> tune to: 11606:v:0:44948 (tuning failed) > DiSEqC: switch pos 0, 13V, loband (index 0) > Now I temporary removed my diseqc switch. > > Is there any ideas ? > > regards > Igor I don't have any answers yet, other than to say that pilot auto-detection was added fairly recently and prior to that some muxes were not locking at all in Europe. This may or may not be related. I've bookmarked this bug, and I'll look into it over the next couple of weeks as I build a new tree. The fact these have very high symbol ratas, is that the only thing these muxes have in common? Regards, Steve _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
