Re: stv0297: improvement for qam256 modulated channels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2007/10/28, e9hack <e9hack@xxxxxxxxxxxxxx>:
I've seen two different values for the carrier offset on Windows XP for a TT-C2300. Registers 20/21h
are programmed with 3c0a or 3ba4 (carrier offset 6763 or 6718). The value depends on the driver
revision. On a TT-C1500, this value is 4000 (carrier offset 7209). It may be possible, that the
value is calculated from some other values. I know, that the patch has no effect for some testers.
This is the first report with a failure. So it isn't possible to add the patch.

In my case, I've some channels in the UHF range with a poor signal strength. Without the patch, I
got ber ~3500h and unc >10h. With the patch, I get ber ~b00h and unc 0.


Sorry, 'carrier offset' should be 'initial demodulation frequency'.

- Hartmut
 


_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux