owning an HP rebranded Hauppauge Express Card shipped with several mid-high end HP laptops I would like to give you some support in further improving cx23885 driver for it to support those tuners.
here are my card specs:
HP Hauppauge WinTv 885
model 77001 rev d4c0 (Model 77xxx Analog/ATSC Hybrid, Xc3028)
tuner: Xceive xc3028 http://www.xceive.com/technology_XC3028.htm
audio tuner: stereo cx23885
decoder: cx23885 http://www.conexant.com/products/entry.jsp?id=393
- insmod cx23885 manages to create a /dev/dvb device folder only if arguments card=3 or card=4 are supplied
- despite the card being recognized with such arguments I cannot manage to use Kaffeine DVB support as although kaffeine -w recognises the card, it cannot scan for any available channels ('scan on' dropdown menu is empty, clicking 'Start Scan' button does not list anything)
- also with Klear, provided a channel.conf, the program cannot tune to any channel and outputs the same error as the scan command from dvb-utils:
"WARNING: frontend type (ATSC) is not compatible with requested tuning type (OFDM) ERROR: initial tuning failed"
- the device is not hot-plug recognized, I had to reboot before the system can actually recognize it (however both express card specs and windows support plung&play).
Any other help I could provide you with debugging/testing these cards I would be pleased to, just ask.
Thank you very very much for pioneering dvb video support for gnu/linux, I really appreciate your efforts.
here is my lspci -vvv -nn -xxxx output
04:00.0 Multimedia video controller [0400]: Conexant Unknown device [14f1:8852] (rev 02)
Subsystem: Hauppauge computer works Inc. Unknown device [0070:7717]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <2us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00: f1 14 52 88 06 01 10 00 02 00 00 04 10 00 00 00
10: 04 00 00 f4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 17 77
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 04 05 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
