Igor Nikanov wrote: > Hi > > on http://www.tbc.ru/index.php?option=com_content&task=view&id=36&Itemid=31 I read about > supported FEC Rates 1/2, 2/3, 3/4, 5/6, 7/8 - and what about fec = 9/10 - is it supported ? > > The hardware supports those rates, if the driver does not then it's a minor change. > on http://www.hauppauge.co.uk/pages/products/data_hvr4000.html > I read about DiSEqC 1.0 supported , and what about other version - 1.1, 1.2 ? > > The hardware supports modes 1.0, 1.1 and 1.2. I'm not sure about the tree, it's a very old tree. > is it possible to connect to card the motor for dish, diseqc-commutator and 2 LNB - for C and Ku bands in > the same time ? which max current can be between this card and motor or LNB ? 400 ma ? > > Hmm. I'm not sure. > why need automatic DVBS2 pilot support ? what's mean "pilot" function ? > > You don't need to worry about Pilot support, it's automatic in the current driver. > is it possible to capture on harddisc the analog video-signal, connected to s-video or composite video > input in HVR4000 ? > > That's quetsion better suited to the v4l-dvb mailing list. > is it possible to capture and to record on hdd the analog terrestrial broadcasting ? > > Yes. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
