Hi, I recently got a Nova-T-Stick (USB 2040:7060) and cannot get it to work. First I tried the drivers from Debian's 2.6.22-2 kernel, and then http://linuxtv.org/hg/v4l-dvb as of a few hours ago and the firmware from http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-1.10.fw I renamed the firmware to dvb-usb-dib0700-03-pre1.fw. My problem is that I cannot get any data out of the dvr0 device. $ cat /dev/dvb/adapter0/dvr0 does not produce any output, and $ mplayer /dev/dvb/adapter0/dvr0 doesn't work either. Before trying to view the stream I have managed to find the channels and tune as described below. Am I doing anything fundamentally wrong? Any help is greatly apreciated as I am running out of ideas to try. Thanks /Fredrik Scanning works and finds all my channels: $ scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/se-Horby_Sallerup >channels.conf scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/se-Horby_Sallerup using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 482000000 0 3 9 3 1 3 0 initial transponder 506000000 0 3 9 3 1 3 0 initial transponder 634000000 0 3 9 3 1 3 0 initial transponder 818000000 0 3 9 3 1 3 0 initial transponder 794000000 0 3 9 3 1 3 0 >>> tune to: 482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE Network Name 'Teracom_Mux_1' 0x0000 0x13f6: pmt_pid 0x13f6 Sveriges Television -- SVT2 Sydnytt (running) 0x0000 0x1464: pmt_pid 0x1464 Sveriges Television -- SVT24 Sydnytt (running) 0x0000 0x13e2: pmt_pid 0x13e2 Sveriges Television -- SVT2 Västnytt (running) 0x0000 0x0366: pmt_pid 0x0366 Sveriges Television -- Barn/Kunskapsk. (running) 0x0000 0x0370: pmt_pid 0x0370 Sveriges Television -- SVT Extra (running) 0x0000 0x03f2: pmt_pid 0x03f2 Sveriges Television -- SVT1 (running) [... snip ...] Tuning seems to work too (is snr 0000 ok?): $ tzap SVT1 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 482000000 Hz video pid 0x03fb, audio pid 0x03fa status 0f | signal 6732 | snr 0000 | ber 001fffff | unc 0000005c | status 1f | signal 6711 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 670e | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 670d | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0001 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 6714 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK [... snip ...] Parts of the dmesg: usb 2-2: new high speed USB device using ehci_hcd and address 9 usb 2-2: configuration #1 chosen from 1 choice dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-03-pre1.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick) DVB: registering frontend 0 (DiBcom 7000PC)... MT2060: successfully identified (IF1 = 1220) input: IR-receiver inside an USB DVB receiver as /class/input/input8 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
