On 10/6/07, David Campbell <david@xxxxxxxxxxxxxxxx> wrote: > Nils Kassube wrote: > > There is a new version of sniffusb available here: > > > > http://www.pcausa.com/Utilities/UsbSnoop/default.htm > > > > That version lets you set a refresh interval and even disable refresh of > > the display. > Great! Thanks for that. The usb capture works very well with that. > Much better. > > I've now captured about 260Mb of log output on XP and then processed to > http://www.aaa.net.au/campbell/analyzed.log Okay - looks like an xc3028 tuner, tuner reset GPIO 6f/7f, slightly unusual GPIO init. Probably needs a new card type (the Terratec Cinergy T XS is closest, but doesn't have the same GPIO init). > Markus Rechberger wrote: > >> I'm guessing the LG tuner it's set to is a can tuner, > >> which is far too big to be in a USB device. I'd suggest that "Terratec > >> Cinergy T XS (MT2060)" > OK, I tried setting card=30 (Terratec Cinergy T XS (MT2060) ) and > card=23 (Pinnacle PCTV DVB-T ) > > dmesg detail is below.... > > em28xx v4l2 driver version 0.0.1 loaded > em28xx new video device (eb1a:2870): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx: you're using the experimental/unstable tree from mcentral.de > em28xx: there's also a stable tree available but which is limited to > em28xx: linux <=2.6.19.2 > em28xx: it's fine to use this driver but keep in mind that it will move > em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > em28xx: proved to be stable > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > attach_inform: eeprom detected. > em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 5c 00 6a 22 00 00 > em28xx #0: i2c eeprom 10: 00 00 04 57 0a 7d 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 > em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 > em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00 > em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > EEPROM ID= 0x9567eb1a > Vendor/Product ID= eb1a:2870 > No audio on board. > 500mA max power > Table at 0x04, strings=0x226a, 0x0000, 0x0000 > tuner 1-0061: chip found @ 0xc2 (em28xx #0) > attach inform (default): detected I2C address c2 > /home/dcampbel/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback > /home/dcampbel/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback > em28xx #0: found i2c device @ 0x1e [zl10353/mt352 dvb-t demodulator] > em28xx #0: found i2c device @ 0xa0 [eeprom] > em28xx #0: found i2c device @ 0xc2 [tuner (analog)] > tuner 1-0061: Tuner has no way to set tv freq > em28xx #0: Found Terratec Cinergy T XS (MT2060) > usbcore: registered new interface driver em28xx > em2880-dvb.c: DVB Init > FIXME:em28xx_i2c_send_bytes(c0): write failed: > =============================== > 00 > ================================ > mt2060 I2C read failed > DVB: registering new adapter (em2880 DVB-T) > DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > Em28xx: Initialized (Em2880 DVB Extension) extension > [root@Vigor11 v4l-dvb-kernel]# lsusb > Bus 003 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 > Bus 005 Device 009: ID 1267:0210 Logic3 / SpectraVideo plc > Bus 005 Device 007: ID 0dda:2026 Integrated Circuit Solution, Inc. > Bus 005 Device 005: ID 0402:5603 ALi Corp. USB 2.0 Q-tec Webcam 300 > Bus 005 Device 008: ID 03f0:1705 Hewlett-Packard > Bus 005 Device 003: ID 07c4:a600 Datafab Systems, Inc. > Bus 005 Device 002: ID 05e3:0606 Genesys Logic, Inc. > Bus 005 Device 004: ID 07ca:e820 AVerMedia Technologies, Inc. > Bus 005 Device 001: ID 0000:0000 > Bus 004 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth > Dongle (HCI mode) > Bus 004 Device 001: ID 0000:0000 > Bus 002 Device 001: ID 0000:0000 > > > >> or "Pinnacle PCTV DVB-T" > em28xx v4l2 driver version 0.0.1 loaded > em28xx new video device (eb1a:2870): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx: you're using the experimental/unstable tree from mcentral.de > em28xx: there's also a stable tree available but which is limited to > em28xx: linux <=2.6.19.2 > em28xx: it's fine to use this driver but keep in mind that it will move > em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > em28xx: proved to be stable > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > input: em2880/em2870 remote control as /class/input/input12 > em28xx-input.c: remote control handler attached > attach_inform: eeprom detected. > em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 5c 00 6a 22 00 00 > em28xx #0: i2c eeprom 10: 00 00 04 57 0a 7d 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 > em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 > em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00 > em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > EEPROM ID= 0x9567eb1a > Vendor/Product ID= eb1a:2870 > No audio on board. > 500mA max power > Table at 0x04, strings=0x226a, 0x0000, 0x0000 > tuner 1-0061: chip found @ 0xc2 (em28xx #0) > attach inform (default): detected I2C address c2 > /home/dcampbel/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback > /home/dcampbel/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback > em28xx #0: found i2c device @ 0x1e [zl10353/mt352 dvb-t demodulator] > em28xx #0: found i2c device @ 0xa0 [eeprom] > em28xx #0: found i2c device @ 0xc2 [tuner (analog)] > tuner 1-0061: Tuner has no way to set tv freq > em28xx #0: Found Pinnacle PCTV DVB-T > usbcore: registered new interface driver em28xx > em2880-dvb.c: DVB Init > FIXME:em28xx_i2c_send_bytes(c0): write failed: > =============================== > 00 > ================================ > mt2060 I2C read failed > DVB: registering new adapter (em2880 DVB-T) > DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > Em28xx: Initialized (Em2880 DVB Extension) extension Yep - turns out that's the wrong tuner type. Aidan. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
