Hello my friend tried to run TT 3200 on Manu's drivers. But there's some problemError "frontend_init: No LNBP21 found!". Could you clarify it. So, hardware are TТ3200motherboard Asus Р4С800 (chipset Intel875P)+ Р4 2400 (socket 478 )+ debian stable with kernel 2.6.18-4-686headers /usr/src/linux-headers-2.6.18-4-686 debian:/opt/manu_3200# cd multiprotodebian:/opt/manu_3200/multiproto# make.............Preparing to compile for kernel version 2.6.18 ***WARNING:*** You do not have the full kernel sources installed.This does not prevent you from building the v4l-dvb tree if you have thekernel headers, but the full kernel source may be required in order to usemake menuconfig / xconfig / qconfig. If you are experiencing problems building the v4l-dvb tree, please trybuilding against a vanilla kernel before reporting a bug. Vanilla kernels are available at http://kernel.org.On most distros, this will compile a newly downloaded kernel: cp /boot/config-`uname -r` <your kernel dir>/.configcd <your kernel dir>make all modules_install install Please see your distro's web site for instructions to build a new kernel. VIDEO_PLANB: Requires at least kernel 2.6.99VIDEO_CAFE_CCIC: Requires at least kernel 2.6.19............... CC [M] /opt/manu_3200/multiproto/v4l/stb0899_drv.o/opt/manu_3200/multiproto/v4l/stb0899_drv.c: In function 'stb0899_sleep':/opt/manu_3200/multiproto/v4l/stb0899_drv.c:874: warning: unused variable 'reg'/opt/manu_3200/multiproto/v4l/stb0899_drv.c:873: warning: unused variable 'state'/opt/manu_3200/multiproto/v4l/stb0899_drv.c: In function 'stb0899_track':/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1880: warning: unused variable 'internal'/opt/manu_3200/multiproto/v4l/stb0899_drv.c: At top level:/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1672: warning: 'stb0899_track_carrier' defined but not used/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1689: warning: 'stb0899_get_ifagc' defined but not used/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1706: warning: 'stb0899_get_s1fec' defined but not used/opt/manu_3200/multiproto/v4l/stb0899_drv.c:1734: warning: 'stb0899_get_modcod' defined but not used..........found 203 modulesmake[1]: Leaving directory `/opt/manu_3200/multiproto/v4l' there's some problem with VIDEO_PLANB and VIDEO_CAFE_CCIC. dmesg ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 217PCI: Setting latency timer of device 0000:00:1f.5 to 64Real Time Clock Driver v1.12acFloppy drive(s): fd0 is 1.44MFDC 0 is a post-1991 82077saa7146: register extension 'budget_ci dvb'.intel8x0_measure_ac97_clock: measured 56080 usecsintel8x0: clocking to 48000ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 201saa7146: found saa7146 @ mem e09a0400 (revision 1, irq 201) (0x13c2,0x1019).saa7146 (0): dma buffer size 192512DVB: registering new adapter (TT-Budget S2-3200 PCI)Intel 810 + AC97 Audio, version 1.01, 23:26:00 May 9 2007adapter has MAC addr = 00:d0:5c:0b:ab:0einput: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input3stb0899_write_regs [0xf1b6]: 02stb0899_write_regs [0xf1c2]: 00stb0899_write_regs [0xf1c3]: 00_stb0899_read_reg: Reg=[0xf000], data=81stb0899_get_dev_id: ID reg=[0x81]stb0899_get_dev_id: Device ID=[8], Release=[1]_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf334], Data=[0x454d4531]_stb0899_read_s2reg Device=[0xf3fc], Base address=[0x00000400], Offset=[0xf33c], Data=[0x01010101]stb0899_get_dev_id: Demodulator Core ID=[EME1], Version=[16843009]_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa2c], Data=[0x47454331]_stb0899_read_s2reg Device=[0xfafc], Base address=[0x00000800], Offset=[0xfa34], Data=[0x01010101]stb0899_get_dev_id: FEC Core ID=[GEC1], Version=[16843009]stb0899_attach: Attaching STB0899stb6100_attach: Attaching STB6100frontend_init: No LNBP21 found!stb0899_release: Release Frontendbudget-ci: A frontend driver was not found for device 1131/7146 subsystem 13c2/1019 _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
