Hi Soeren, Am Freitag, den 14.09.2007, 22:33 +0200 schrieb Soeren Sonnenburg: > (I'm CC'ing hermann as he might know the solution) > > Dear all, > > for some reason I cannot tune to ZDF on the asus p7131, which however > works with a tt-budget card. When I scan > > scan -a 1 /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Berlin >~/scan1 > scan -a 2 /usr/share/doc/dvb-utils/examples/scan/dvb-t/de-Berlin >~/scan2 > > and do a diff, it is the following 4 lines the asus p7131 does not find: > > ZDF:570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:545:546:514 > 3sat:570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:561:562:515 > Doku/KiKa:570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:593:594:517 > ZDFinfokanal:570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:577:578:516 > > Obviously I don't get a channel lock when I use try to use these found lines in channels.conf... > > Any ideas why the p7131 fails to see these/does not get a channel lock? > > Soeren closest to you is this one with 8MHz bandwidth on the older one I have without LNA. You might try with AUTO for all, except bandwidth. T 578000000 8MHz 2/3 NONE QAM16 8k 1/4 NONE Haven't find anything special for this one so far on the tda8275a with tda10046a. An FMD1216ME with tda10046a, not much tested yet, more likely has some flaw around there on slightly weaker signal. Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb