Hi Richard, Strange, the Compro VideoMate T200 is listed as a saa7134 supported card (cards #70 or #71 I think). Just for interest sake, do you know which demodulator chip the T200 uses? I'd like to compare this with the ZL10313 used by the S300. BTW, I did my S300 tests with Mandriva 2007.1 x86_64, with kernel 2.6.17-14mdvcustom Regards JD Richard (MQ) wrote: > Hi List, > >> What is needed to add support for the Compro VideoMate S300/S350 DVB-S >> budget card? >> >> Below is the output of 'lspci -v -nn': >> >> 07:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 >> Video Broadcast Decoder [1131:7130] (rev 01) >> Subsystem: Compro Technology, Inc. Unknown device [185b:c900] >> Flags: bus master, medium devsel, latency 32, IRQ 66 >> Memory at 51104800 (32-bit, non-prefetchable) [size=1K] >> Capabilities: [40] Power Management version 1 >> >> The card is uses the Philips SAA7130 PCI bridge with a ZL10313 >> demodulator/frontend chip, which the DVB wiki says is closely related to >> the mt312 demodulator. >> >> It is not clear to me how to specify the mt312 tuner, and 'modprobe >> saa7134-dvb' fails with 'saa7130[0]: frontend initialization failed' >> when loading the wrong (mt532) frontend dependency. > > I get very similar behaviour from a Compro VideoMate DVB-T200, also > using SAA713x bridge - dmesg reports "saa7130[0]/dvb: frontend > initialization failed" when loading saa7134-dvb > > Any pointers gratefully received. > > BTW - previously tried in OpenSuSE 10.2, kernel 2.6.18.8 - currently in > 10.3 beta 2, kernel 2.6.22.3 > > Cheers, _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
