On 8/7/07, Geoffrey Hausheer <inli3epy93n at phracturedblue.com> wrote: > I have been unable to tune my HD5000 using recent kernels for quite > some time, and I finally broke down and tried to figure out what is > going on. > It turns out that ever since the lgh06xf driver was removed, my card > has been unable to tune. However this is only true after a hard-boot. > If I boot into an earlier driver, tune it once and get a lock, then > soft-boot unto a recent driver, it works fine. > > I didn't really dig into that, but comparing dvb_pll_attach to > lgh06xf_attach I noticed the only significant difference was some > extra i2c stuff. > > Specifically this: > ret = i2c_transfer (i2c, &msg, 1); > if (ret != 1) > return NULL; > > Well, I checked, and, indeed, we fall through here and abort the > attach before all the callbacks are registered. Since the lgh06xf > didn't even do this, I just ignored the return code, and voila, my > HD5000 tunes fine again. FWIW, I just wanted to confirm that I have the same problem and that Geoffrey's patch/hack fixes it for me. Bolek _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
