I have a Twinhan VP-1034 and I use the the latest hg, today, and http://jusst.de/manu/mantis-v4l-dvb.tar.bz2 with kernel 2.6.22.1. When I do a 'modprobe mantis' my prompt never returns. The machine still is working. Following is in my log with option verbose=255 for mantis module: Aug 25 17:53:32 recorder kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 22 Aug 25 17:53:32 recorder kernel: Aug 25 17:53:32 recorder kernel: gpif status: 6000 irqcfg: 0000 Aug 25 17:53:32 recorder kernel: mantis_set_direction (0): TS direction setup Aug 25 17:53:32 recorder kernel: irq: 22, latency: 64 Aug 25 17:53:32 recorder kernel: memory: 0xf7eff000, mmio: 0xf88fe000 Aug 25 17:53:32 recorder kernel: found a VP-1034 PCI DVB-S/DSS device on (02:09.0), Aug 25 17:53:32 recorder kernel: Mantis Rev 1 [1822:0014], irq: 22, latency: 64 Aug 25 17:53:32 recorder kernel: memory: 0xf7eff000, mmio: 0xf88fe000 Aug 25 17:53:32 recorder kernel: mantis_i2c_write: Address=[0x25] <W>[ ] Aug 25 17:53:33 recorder kernel: mantis_i2c_write: Address=[0x25] <W>[ 00 <3>mantis_ack_wait (0): Waiting for Slave RACK Aug 25 17:53:33 recorder kernel: mantis_ack_wait (0): Waiting for Slave RACK Aug 25 17:53:42 recorder last message repeated 499 times Aug 25 17:53:42 recorder kernel: mantis_ack_wait (0): Slave RACK Fail ! Aug 25 17:53:42 recorder kernel: mantis_i2c_write (0): ACK failed<W> I must say I also have a Hauppauge PVR-150 and a PVR-350 in this machine, using ivtv from hg, and when I remove both I do not have this problem. The modules load without any problems. If more verbose messages are needed from othe modules please let me know. I do not have this problem with kernel versions 2.6.20 and below. Something changed in 2.6.21 and I do not know what. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
