Steven Toth wrote: > Jyrki Niskala wrote: >> Hi >> When trying to tune transponders on Thor 1.0 W I get no lock on >> channels transmitted by DVB-S2 / 8PSK. >> I get lock on DVB-S channels and when using scan I find 301 services, >> so it's seems to work with DVB-S. >> The only tip I found when searching was in Hauppauge forum (for >> another OS though...) that you should use auto mode on FEC to get >> lock on 8PSK but that's not supported in hvr4000 tree. >> >> I have a Hauppauge HVR4000 and a Nova-HD-S2 to play with and I'm >> willing to make tests to take driver further... >> >> Thanks in advance. / Jyrki >> >> > Make sure you're specifying the modulation correctly for the mux > you're interested in. > > Regards, > > Steve I use following command. jyrki@legolas:~/dvb-s2/szap2$ ./szap2 -t 2 -e 2 -m 8 -c ./ThorW1.conf -n 2 reading channels from file './ThorW1.conf' zapping to 2 'Canal+ Sport HD': sat 0, frequency = 11421 MHz H, symbolrate 25000000, vpid = 0x0202, apid = 0x0288 sid = 0x057c (fec = 32, mod = 8) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'Conexant CX24116 DVB-S2' DVB-S2 diseqc: sat_no:0 pol_vert:0 hi_band:0 cmd:e0 10 38 f2 wait:0 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 1671000, Srate = 25000000 (DVB-S2) do_tune: Frequency = 1671000, Srate = 25000000 (SET_PARAMS) status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | / Jyrki _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
