Hi I have two MSI Mega Sky 5580 both of them show this behavior, when I try to use tzap sometimes like 8 of 10 times I get nothing. If I unplug and insert it again it works for sometime. Does anyone know what I could do about this. I have tried this patch, it solved some of the problems, but all of them. http://www.linuxtv.org/pipermail/linux-dvb/2007-February/015863.html Here are some output from dmesg during boot [ 40.775768] dvb-usb: found a 'MSI Mega Sky 55801 DVB-T USB2.0' in warm state. [ 40.776014] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 40.779968] DVB: registering new adapter (MSI Mega Sky 55801 DVB-T USB2.0). -- Snip -- [ 41.056830] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... [ 41.104995] Quantek QT1010 successfully identified. [ 41.105003] dvb-usb: MSI Mega Sky 55801 DVB-T USB2.0 successfully initialized and connected. [ 41.107287] usbcore: registered new interface driver dvb_usb_gl861 And here is the output from dmesg when trying to use tzap [ 8445.521973] zl10353: write to reg 65 failed (err = 0)! [ 8447.634528] zl10353: write to reg 70 failed (err = 0)! [ 8451.040948] zl10353_read_register: readreg error (reg=8, ret==0) [ 8453.189186] zl10353_read_register: readreg error (reg=19, ret==0) [ 8455.185943] zl10353_read_register: readreg error (reg=8, ret==0) [ 8457.657748] zl10353_read_register: readreg error (reg=19, ret==0) [ 8460.716772] zl10353_read_register: readreg error (reg=18, ret==0) [ 8488.498301] qt1010 I2C read failed [ 8493.286310] zl10353_read_register: readreg error (reg=18, ret==0) [ 8495.833982] zl10353_read_register: readreg error (reg=19, ret==0) [ 8499.116485] zl10353_read_register: readreg error (reg=7, ret==0) [ 8501.712194] zl10353_read_register: readreg error (reg=18, ret==0) [ 8504.140197] zl10353_read_register: readreg error (reg=19, ret==0) [ 8510.904866] zl10353_read_register: readreg error (reg=19, ret==0) [ 8513.388773] zl10353_read_register: readreg error (reg=18, ret==0) [ 8515.521163] zl10353: write to reg 70 failed (err = 0)! [ 8522.042258] qt1010 I2C write failed [ 8524.210716] zl10353_read_register: readreg error (reg=11, ret==0) [ 8528.990607] zl10353_read_register: readreg error (reg=19, ret==0) [ 8531.266875] qt1010 I2C write failed [ 8535.495724] qt1010 I2C read failed [ 8539.968406] zl10353_read_register: readreg error (reg=18, ret==0) [ 8542.611907] zl10353_read_register: readreg error (reg=21, ret==0) [ 8544.868087] zl10353: write to reg 62 failed (err = 0)! [ 8547.208241] zl10353_read_register: readreg error (reg=19, ret==0) [ 8551.493118] zl10353: write to reg 55 failed (err = 0)! [ 8553.549644] qt1010 I2C write failed [ 8616.907833] zl10353: write to reg 51 failed (err = 0)! [ 8620.070551] zl10353_read_register: readreg error (reg=19, ret==0) [ 8622.135065] qt1010 I2C write failed [ 8624.707441] zl10353_read_register: readreg error (reg=18, ret==0) [ 8626.715429] zl10353: write to reg 56 failed (err = 0)! [ 8628.732149] qt1010 I2C write failed [ 8632.182367] zl10353_read_register: readreg error (reg=19, ret==0) /Jonas _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
