I have recently bought a second KNC1 TVstation DVB-C+ card for my MythTV server but tuning with the new card doesn't work at all. The two cards looks identical and identifies themselves in dmesg identical (apart for some memory adress differences). However, upon closer examination the only thing different was the text on the SAA7146 chip. The old one read: SAA7146AH CG1902 TtG06404 and the new: SAA7146AH CG1902 TtG06424 Both cards has a Cineview CI connected. Runing dvbscan gives this: tv ~ # dvbscan -a 0 /usr/share/dvb/dvb-c/se-comhem scanning /usr/share/dvb/dvb-c/se-comhem using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 362000000 6875000 0 3 >>> tune to: 362000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64 WARNING: filter timeout pid 0x0011 WARNING: filter timeout pid 0x0000 WARNING: filter timeout pid 0x0010 dumping lists (0 services) Done. tv ~ # dmesg (with both cards) Linux video capture interface: v2.00 saa7146: register extension 'budget_av'. saa7146: found saa7146 @ mem ffffc2000000ec00 (revision 1, irq 11) (0x1894,0x0023). saa7146 (0): dma buffer size 192512 DVB: registering new adapter (KNC1 DVB-C Plus MK3) adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff ivtv: Start initialization, version 1.0.0 saa7146_vv: saa7146 (0): registered device video0 [v4l2] KNC1-0: MAC addr = 00:09:d6:6d:5d:12 nvidia: module license 'NVIDIA' taints kernel. DVB: registering frontend 0 (Philips TDA10023 DVB-C)... budget-av: ci interface initialised. saa7146: found saa7146 @ mem ffffc2000017e800 (revision 1, irq 5) (0x1894,0x0023). saa7146 (1): dma buffer size 192512 DVB: registering new adapter (KNC1 DVB-C Plus MK3) adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff budget-av: cam inserted A saa7146_vv: saa7146 (1): registered device video1 [v4l2] KNC1-1: MAC addr = 00:09:d6:6d:5d:6c DVB: registering frontend 1 (Philips TDA10023 DVB-C)... budget-av: ci interface initialised. ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) budget-av: cam inserted B ivtv0: Loaded v4l-cx2341x-enc.fw firmware (-139636927490144 bytes) dvb_ca adapter 1: DVB CAM detected and initialised successfully ivtv0: Encoder revision: 0x02060039 tveeprom 2-0050: Hauppauge model 32054, rev B148, serial# 7263427 tveeprom 2-0050: tuner model is LG TP18PSB11D (idx 48, type 29) tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 2-0050: audio processor is MSP4418 (idx 25) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-250 tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (KNC1 DVB-C Plus MK3) saa7115 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a (KNC1 DVB-C Plus MK3) saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0) msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect tuner 2-0061: type set to 29 (LG PAL_BG (TPI8PSB11D)) ivtv0: Registered device video2 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Initialized card #0: Hauppauge WinTV PVR-250 ivtv: End initialization If anyone has any ideas to try out or need some more information please let me know. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
