On 8/13/07, Simon Kenyon <simon@xxxxxxxx> wrote: > Manu Abraham wrote: > > On 8/13/07, Simon Kenyon <simon@xxxxxxxx> wrote: > > > >> Manu Abraham wrote: > >> > >>> On 8/13/07, Simon Kenyon <simon@xxxxxxxx> wrote: > >>> > >>> > >>>> Simon Kenyon wrote: > >>>> > >>>> > >>>>> just bought 3 cards for my mythtv master backend. silly me. > >>>>> > >>>>> anyway, using szap i find that tuning to a particular channel is at best > >>>>> a hit and miss affair. > >>>>> i have a 4x16 multiswitch which feeds astra28.2E into these three cards > >>>>> and 4 satellite receivers. > >>>>> they all get decent signal. i previously had a nexus-s and a technotrend > >>>>> 1500ci in the box and they had no problems with the signal. > >>>>> > >>>>> is there anything i can do - other than binning them? > >>>>> i'm using the hg tree of v4l-dvb. > >>>>> is there an expermental tree out there with some improvements for this card? > >>>>> > >>>>> > >>>>> > >>>> a data point is that it will not lock onto any signals with a vertical > >>>> polarization > >>>> but will lock on to signals with a horizontal polarization (at the > >>>> second attempt - not the first). > >>>> the latter sounds like a timing issue. > >>>> > >>>> > >>> Some of the 1025 cards have been very nasty. It resembles an older > >>> case where one card would not tune to either vertical (or was it > >>> Horizontal) completely stuck at one volytage level. > >>> > >>> To take a bite at it, load the dst module with verbose=5, module > >>> parameter. look at the logs, if you have timing errors you will see > >>> them in the log. can you check whether this tree behaves the same ? http://jusst.de/hg/v4l-dvb/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
