On Wed, 8 Aug 2007, Michael Krufky wrote: > >On Wed, 8 Aug 2007, Geoffrey Hausheer wrote: > > > > > >>On 8/8/07, Michael Krufky mkrufky-at-linuxtv.org wrote: > >> > >> > >>>On 8/7/07, Geoffrey Hausheer wrote: > >>>Although your patch may appear to fix your problem, I suspect that it > >>>is really curing a symptom of the problem, and not the cause. > >>> > >>> > >>This is possible. I don't know anything at all about i2c. I just > >>tried to reverted the negative consequences of the patch which broke > >>my system. > >> > >> > > > >The real problem is with the flexcop i2c support. It only allows a very > >limited set of a i2c commands, and a one byte read command like the pll > >probe uses isn't supported. > > > Trent, > > If that is the case, then why do you think Geoffrey is having this > problem while others are not? The HD-5000 is the only flexcop card that uses dvb-pll with a pll directly attached to the I2C bus. The flexcop driver doesn't check the return value of dvb_pll_attach, so there is no error message. It will just not work correctly. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb