Michael Krufky wrote: > e9hack wrote: > > Hi, > > > > the min frequencies of the DVB-C frontends are wrong. In Europe, the center frequency of the lowest > > channel is 50.5MHz and not 51MHz. All known cards with the stv0297/tda0002x/ves1820 frontend are > > able to tune to this frequency. I've changed the range to the lowest channel - 1/2 bandwidth and the > > highest channel + 1/2 bandwidth. For the design of the dvb driver, the frequency ranges must be part > > of the tuner and not of the frontend itself. The same frontend may be used for different tuners. The > > attached patch does only fix the ranges and not the design. > > Now I'm beginning to have doubts about Oliver's original patch: > > dvb_frontend: Range check of frequency and symbol rate > http://linuxtv.org/hg/v4l-dvb/rev/8186a34dd0a6 > > Should we be checking fe->ops.tuner_ops.info.frequency_min|max , instead of > fe->ops.info.frequency_min|max ??? Hm, I was not aware that there is another info.frequency_min|max in tuner_ops. :-( Do we need both of them? CU Oliver -- ---------------------------------------------------------------- VDR Remote Plugin 0.3.9: http://www.escape-edv.de/endriss/vdr/ ---------------------------------------------------------------- _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
