Re: Help with writing a DVB driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 02/08/07, Andreas Oberritter <obi@xxxxxxxxxxx> wrote:
Hello Thomas,

There is another open source driver implementing the audio and video
decoder API:

> And last question, will a software like mplayer be able to play dvb
> streams just with the dvb drivers or does it need the /dev/video and the
> v4l drivers ?

/dev/video isn't needed. Mplayer for example has the switch -vo mpegpes,
which uses the DVB API for playback. For the "full featured" cards this
means that the TV-output is used.

However, in case you've been looking for it, there is no standard API
for using a digital video encoder or an A/V switch, to configure PAL vs.
NTSC, RGB vs. CVBS or SCART outputs etc.

The CVS tree mentioned above uses a custom interface for it (in
driver/avs and driver/saa7126).

Regards,
Andreas
 
 
Thanks again,

--
Thomas Gambier
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux