Can you please try the following? http://www.linuxtv.org/pipermail/linux-dvb/2007-July/019368.html And report whether it works or not? Patrick. On Mon, 4 Jun 2007, Soeren Moch wrote: > Last week I bought a Hauppauge Nova-T Stick, which is almost unusable > with vdr. > > USB-IDs of Stick: > 0x2040_0x7060 USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2 > used driver: > dvb-usb-dib0700 from linux-2.6.21.1 / > hg snapshot from last friday (June 1st, 2007) > used firmware: > dvb-usb-dib0700-01.fw ( with dvb-usb-dib0700-02-rc1.fw even worse) > vdr version: 1.4.5 / 1.4.0 > > After some debugging I found out following: > > Calls to mt2060_set_params (tune to a VHF/UHF channel) are ignored > after a call to dib0700_streaming_ctrl(adap, 1); (enable video > streaming) until we call dib0700_streaming_ctrl(adap, 0); (disable > video streaming). Unfortunately the vdr under almost all circumstances > starts video streaming and and trys to tune afterwards. > > As the Nova-T Stick is listed in dvb-wiki as fully supported there are > 2 opportunities (as I can see): > 1. a new hardware version of this stick (i2c bus of tuner is disabled > during streaming to avoid noise as in other dvb frontends, maybe > this was not the case in older hw versions) > 2. a hardware bug in my stick > > I hope somebody can help solving this problem. > > Thanks, > S:oren > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
