Thanks for all ur reply.
Ok i will try as per u suggested.
and then will be back if any problem persists.
now after inserting the wintv nova-s-plus card.
i tried to run xawtv -hwscan command which will list all the cards connected.
but for this wintv nova card its showing
what is this. is that not identifying it since there is no driver, or someother problem
Thanks and Regards
Thiru...
On 7/16/07, joachimbanzhaf@xxxxxxxxxxxxx <joachimbanzhaf@xxxxxxxxxxxxx
> wrote:
Hi,
I have seen some cx88 drivers in a Suse 2.6.5 Kernel, so, I guess RHEL
2.6.9 has them, too. Some RHEL guy on the list?
If they do, you should find something with a command like this:
root@job6 ~
# find /lib/modules/ -name '*cx88*' -print
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88/cx88-blackbird.ko
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88/cx8800.ko
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88/cx8802.ko
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88/cx88xx.ko
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88/cx88-vp3054-i2c.ko
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88/cx88-alsa.ko.deact
/lib/modules/2.6.20.7-smp/kernel/drivers/media/video/cx88/cx88-dvb.ko
...
A command "modprobe -v cx88xx" should show some insmod messages, and/or
an "lsmod | grep cx88" should display cx88 related modules loaded in
your kernel.
As I said, you most probably need no tar archive. The driver should be
in your kernel already.
If it is not, or you want a newer version, you can download, compile and
install it from the linuxtv website. It is not cx88 specific. These are
all dvb drivers and infrastructure at once.
IIRC, it was something like
wget tarFile from linuxtv.org website
untar tarFile
cd untaredDirectory
./configure
make
sudo make install
modprobe -v cx88-dvb
It's been a while, so please see the details about that on the
linuxtv.org wiki. That is where I read about all that, back then...
Bye,
Joachim
----- Originalnachricht -----
Von: "thirunavukarasu selvam" <gs.thiru@xxxxxxxxx>
Datum: Montag, 16. Juli 2007 2:39 pm
Betreff: Re: Linux Driver for WinTV Nova-S-Plus card
> Hi,
> I am using RHEL 3.4.4-22.
> kernel version: 2.6.9
> The machine which am using is HP G3 server.
> Dual-Core and Quad-Core Intel Xeon 5X00 sequence processors
>
> i have searched for cx88 driver and got two tar files.
> cx88-0.0.3.tar.gz and cx88-0.0.4.tar.gz.
> is this is the one required driver.
> I don't know how use this.
> can u help me out.
>
> Thanks and Regards
> Thiru...
>
> On 7/16/07, joachimbanzhaf@xxxxxxxxxxxxx
> <joachimbanzhaf@xxxxxxxxxxxxx>wrote:
> >
> > Hi,
> >
> > what version of linux kernel are you using?
> > It is included with the kernel for a long time.
> > Look/google for cx88.
> >
> > I have that card and had issues with it on one mainboard (Intel 965
> > Chipset, Dualcore CPU, 64bit). It lost signal lock very often. Noone
> > seemd to care on this ML, so I dont know the maintenance status
> of it :-(
> >
> > It works flawlessly on an other Motherboard (Intel Singlecore,
> 32bit)> though.
> >
> > Good luck!
> >
> > Joachim Banzhaf
> >
> >
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb@xxxxxxxxxxx
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
>
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
