Hi, I'm trying to setup the above card to work in DVB-S mode without success. I'm using Suse 10.1, with kernel 2.6.16.21-0.8-smp (distro release) andthe latest hg downloaded drivers from linuxtv.org, also I tried steven'sbranch. I cannot make work the dvb-s frontend, only CX22702 (dvb-t) isloaded. Many times I have to play with cx8800/cx8802 load to register the dvb-tfrontend getting errors like...>>>>>>>>>>Jul 11 12:56:54 pinocho kernel: cx8802_register_driver() ->registeringdriver type=dvb access=sharedJul 11 12:56:54 pinocho kernel: CORE cx88[0]: subsystem: 0070:1402,board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53]Jul 11 12:56:54 pinocho kernel: cx88[0]/2: cx2388x based dvb cardJul 11 12:56:54 pinocho kernel: cx22702_readreg: readreg error (ret == -121)Jul 11 12:56:54 pinocho modprobe: FATAL: Error inserting cx88_dvb(/lib/modules/2.6.16.21-0.8-smp/kernel/drivers/media/video/cx88/cx88-dvb.ko): No such deviceJul 11 12:56:54 pinocho kernel: cx88[0]: frontend initialization failedJul 11 12:56:54 pinocho kernel: cx8802_dvb_probe dvb_register failed err= -1Jul 11 12:56:54 pinocho kernel: cx8802_register_driver() ->probe failederr = -1>>>>>>>>>>>>>>>>< this is the output of lsmod |grep cx>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>cx88_dvb 13700 0cx8800 32368 0compat_ioctl32 5120 1 cx8800cx88_vp3054_i2c 6528 1 cx88_dvbmt352 9348 1 cx88_dvbdvb_pll 13444 1 cx88_dvbor51132 11396 1 cx88_dvbvideo_buf_dvb 9348 1 cx88_dvbnxt200x 15364 1 cx88_dvbisl6421 5888 1 cx88_dvbzl10353 9096 1 cx88_dvbcx24123 14472 1 cx88_dvblgdt330x 11268 1 cx88_dvbcx22702 9092 1 cx88_dvbcx8802 18820 1 cx88_dvbcx88xx 63396 3 cx88_dvb,cx8800,cx8802ir_common 37380 1 cx88xxi2c_algo_bit 12168 2 cx88_vp3054_i2c,cx88xxtveeprom 17552 1 cx88xxvideodev 27392 2 cx8800,cx88xxv4l2_common 19968 3 cx8800,cx88xx,videodevbtcx_risc 8072 3 cx8800,cx8802,cx88xxvideo_buf 24708 5 cx88_dvb,cx8800,video_buf_dvb,cx8802,cx88xxi2c_core 23680 14cx88_vp3054_i2c,mt352,dvb_pll,or51132,nxt200x,isl6421,zl10353,cx24123,lgdt330x,cx22702,cx88xx,i2c_algo_bit,tveeprom,i2c_i801>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<< and the kernel messages from dmesg....Jul 11 12:58:29 pinocho kernel: compat_ioctl32: module not supported byNovell, setting U taint flag.Jul 11 12:58:29 pinocho kernel: cx8800: module not supported by Novell,setting U taint flag.Jul 11 12:58:29 pinocho kernel: cx2388x v4l2 driver version 0.0.6 loadedJul 11 12:58:29 pinocho kernel: ACPI: PCI Interrupt 0000:05:04.0[A] ->GSI 20 (level, low) -> IRQ 50Jul 11 12:58:29 pinocho kernel: cx88[0]/0: found at 0000:05:04.0, rev:5, irq: 50, latency: 32, mmio: 0xd0000000Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device video0 [v4l2]Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device vbi0Jul 11 12:58:29 pinocho kernel: cx88[0]/0: registered device radio0Jul 11 12:58:56 pinocho kernel: cx88_dvb: module not supported byNovell, setting U taint flag.Jul 11 12:58:56 pinocho kernel: cx2388x dvb driver version 0.0.6 loadedJul 11 12:58:56 pinocho kernel: cx8802_register_driver() ->registeringdriver type=dvb access=sharedJul 11 12:58:56 pinocho kernel: CORE cx88[0]: subsystem: 0070:1402,board: Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T [card=53]Jul 11 12:58:56 pinocho kernel: cx88[0]/2: cx2388x based dvb cardJul 11 12:58:56 pinocho kernel: DVB: registering new adapter (cx88[0])Jul 11 12:58:56 pinocho kernel: DVB: registering frontend 0 (ConexantCX22702 DVB-T)...>>>>>>>>>>>>>>>>>>>> Could someone post his modprobe.d file with the working load/parametersorder to get the dvb-s frontend loaded? Thanking in advance,-- Emilio Castellano -- Emilio Castellano LeivaDepartamento de SistemasAbdón Terradas, 4 - 28015 Madrid (ESPAÑA)T.: +34 91 121 4430 | www.microgenesis.es _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
