Hi,
I'm experiencing extreme difficulties in getting a Technisat Airstar 2
working under Ubuntu (Feisty) with Ubuntu-Kernel: 2.6.20-16-386.
I've attached the dmesg-log and as far as I'm assessing the situation
the drivers are loaded correctly, by udev.
/dev/dvb/adapter0 exists and is correctly populated.
`$lsmod | grep dvb` shows:
dvb_core 78760 1 b2c2_flexcop
dvb_pll 14468 1 b2c2_flexcop
i2c_core 21648 5 stv0297,i2c_ec,mt352,\
b2c2_flexcop,dvb_pll
`lsmod | grep flexcop` shows:
b2c2_flexcop_pci 8344 0
b2c2_flexcop 27916 1 b2c2_flexcop_pci
dvb_core 78760 1 b2c2_flexcop
dvb_pll 14468 1 b2c2_flexcop
i2c_core 21648 5 stv0297,i2c_ec,mt352,\
b2c2_flexcop,dvb_pll
I've already verified, that the dvb-t-signal is receiveable, someone
lent me a TV and a dvb-t-box.
Someone from my aread supplied a working channels.conf,
the output of `tzap 3sat` for example is:
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 570000000 Hz
video pid 0x0231, audio pid 0x0232
status 00 | signal 78af | snr 0000 | ber 00000000 | unc 00000000 |
status 00 | signal 700f | snr 0000 | ber 00000000 | unc 00000000 |
status 00 | signal 000f | snr 0000 | ber 00000000 | unc 00000000 |
....
I'm experiencing similar outputs with different channels.
The Card is brand-new, but nonetheless I'm suspecting the hardware to
be faulty. Is it advisable to try the hg-drivers?
Is there another possibility to debug this further?
best regards,...
--
Marcus
[ 0.000000] Linux version 2.6.20-16-386 (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Thu Jun 7 20:16:13 UTC 2007 (Ubuntu 2.6.20-16.29-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fde0000 end: 000000003fee0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fee0000 size: 0000000000003000 end: 000000003fee3000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fee3000 size: 000000000000d000 end: 000000003fef0000 type: 3
[ 0.000000] copy_e820_map() start: 000000003fef0000 size: 0000000000010000 end: 000000003ff00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f3d10
[ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261856
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261856
[ 0.000000] On node 0 totalpages: 261856
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32227 pages, LIFO batch:7
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 AWARD ) @ 0x000f7da0
[ 0.000000] ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee3040
[ 0.000000] ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee30c0
[ 0.000000] ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee6dc0
[ 0.000000] ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[ 0.000000] Detected 1799.525 MHz processor.
[ 33.309497] Built 1 zonelists. Total pages: 259811
[ 33.309499] Kernel command line: root=UUID=c312e513-69b9-4fda-8ec9-b95bd77711f9 ro quiet splash
[ 33.309639] mapped APIC to ffffd000 (fee00000)
[ 33.309641] mapped IOAPIC to ffffc000 (fec00000)
[ 33.309644] Enabling fast FPU save and restore... done.
[ 33.309647] Enabling unmasked SIMD FPU exception support... done.
[ 33.309654] Initializing CPU#0
[ 33.309698] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 33.310867] Console: colour VGA+ 80x25
[ 33.311273] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 33.311922] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 33.330002] Memory: 1027516k/1047424k available (1917k kernel code, 19228k reserved, 868k data, 328k init, 129920k highmem)
[ 33.330013] virtual kernel memory layout:
[ 33.330014] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
[ 33.330015] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 33.330017] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 33.330018] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 33.330020] .init : 0xc03bc000 - 0xc040e000 ( 328 kB)
[ 33.330021] .data : 0xc02df423 - 0xc03b8434 ( 868 kB)
[ 33.330022] .text : 0xc0100000 - 0xc02df423 (1917 kB)
[ 33.330025] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 33.409699] Calibrating delay using timer specific routine.. 3600.75 BogoMIPS (lpj=7201508)
[ 33.409731] Security Framework v1.0.0 initialized
[ 33.409737] SELinux: Disabled at boot.
[ 33.409747] Mount-cache hash table entries: 512
[ 33.409842] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 33.409850] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 33.409852] CPU: L2 Cache: 128K (64 bytes/line)
[ 33.409855] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 33.409864] Compat vDSO mapped to ffffe000.
[ 33.409868] Remapping vsyscall page to ffffe000
[ 33.409876] CPU: AMD Sempron(tm) Processor 3000+ stepping 02
[ 33.409881] Checking 'hlt' instruction... OK.
[ 33.426108] Early unpacking initramfs... done
[ 33.730596] ACPI: Core revision 20060707
[ 33.735136] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 33.738252] ENABLING IO-APIC IRQs
[ 33.738411] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 33.885839] Booting paravirtualized kernel on bare hardware
[ 33.885904] Time: 5:04:02 Date: 05/19/107
[ 33.885934] NET: Registered protocol family 16
[ 33.886005] EISA bus registered
[ 33.886008] ACPI: bus type pci registered
[ 33.906988] PCI: PCI BIOS revision 2.10 entry at 0xfa6b0, last bus=1
[ 33.906991] PCI: Using configuration type 1
[ 33.906992] Setting up standard PCI resources
[ 33.915024] ACPI: Interpreter enabled
[ 33.915029] ACPI: Using IOAPIC for interrupt routing
[ 33.915450] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 33.915455] PCI: Probing PCI hardware (bus 00)
[ 33.915496] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 33.916077] Boot video device is 0000:01:00.0
[ 33.916107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 33.947038] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 33.947246] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 33.947449] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 33.947653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 33.947857] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 33.948064] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 33.948269] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 33.948479] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 33.950825] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 33.950836] pnp: PnP ACPI init
[ 33.953846] pnp: PnP ACPI: found 12 devices
[ 33.953851] PnPBIOS: Disabled by ACPI PNP
[ 33.953897] PCI: Using ACPI for IRQ routing
[ 33.953900] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 33.959330] NET: Registered protocol family 8
[ 33.959332] NET: Registered protocol family 20
[ 33.959924] PCI: Bridge: 0000:00:01.0
[ 33.959927] IO window: disabled.
[ 33.959931] MEM window: e8000000-e9ffffff
[ 33.959934] PREFETCH window: e0000000-e7ffffff
[ 33.959968] NET: Registered protocol family 2
[ 33.997727] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 33.997877] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[ 33.998362] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 33.998610] TCP: Hash tables configured (established 131072 bind 65536)
[ 33.998613] TCP reno registered
[ 34.009792] checking if image is initramfs... it is
[ 34.610545] Freeing initrd memory: 6719k freed
[ 34.610867] audit: initializing netlink socket (disabled)
[ 34.610878] audit(1182229442.384:1): initialized
[ 34.610919] highmem bounce pool size: 64 pages
[ 34.610985] VFS: Disk quotas dquot_6.5.1
[ 34.611002] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 34.611046] io scheduler noop registered
[ 34.611049] io scheduler anticipatory registered
[ 34.611051] io scheduler deadline registered
[ 34.611061] io scheduler cfq registered (default)
[ 34.685844] isapnp: Scanning for PnP cards...
[ 35.039247] isapnp: No Plug & Play device found
[ 35.075763] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 35.075864] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.076095] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 35.076776] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.077080] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 35.077331] mice: PS/2 mouse device common for all mice
[ 35.077738] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 35.077937] input: Macintosh mouse button emulation as /class/input/input0
[ 35.077961] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 35.077965] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 35.078148] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 35.078151] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 35.078438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.078442] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 35.078532] EISA: Probing bus 0 at eisa.0
[ 35.078540] Cannot allocate resource for EISA slot 1
[ 35.078549] Cannot allocate resource for EISA slot 4
[ 35.078563] EISA: Detected 0 cards.
[ 35.108641] TCP cubic registered
[ 35.108650] NET: Registered protocol family 1
[ 35.108670] Using IPI Shortcut mode
[ 35.108740] ACPI: (supports S0 S3 S4 S5)
[ 35.108777] Magic number: 11:467:62
[ 35.109113] Freeing unused kernel memory: 328k freed
[ 35.109648] Time: tsc clocksource has been installed.
[ 35.122047] input: AT Translated Set 2 keyboard as /class/input/input1
[ 36.365628] Capability LSM initialized
[ 36.407467] ACPI: Fan [FAN] (on)
[ 36.412607] ACPI: Thermal Zone [THRM] (30 C)
[ 36.991734] usbcore: registered new interface driver usbfs
[ 36.991753] usbcore: registered new interface driver hub
[ 36.991768] usbcore: registered new device driver usb
[ 36.992388] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 36.992420] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 36.992431] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 36.992566] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 36.992583] ohci_hcd 0000:00:03.0: irq 16, io mem 0xea033000
[ 37.032678] sis900.c: v1.08.10 Apr. 2 2006
[ 37.079742] usb usb1: configuration #1 chosen from 1 choice
[ 37.079768] hub 1-0:1.0: USB hub found
[ 37.079777] hub 1-0:1.0: 3 ports detected
[ 37.181714] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 37.181727] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 37.181747] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 37.181760] ohci_hcd 0000:00:03.1: irq 17, io mem 0xea034000
[ 37.216341] Floppy drive(s): fd0 is 1.44M
[ 37.233298] FDC 0 is a post-1991 82077
[ 37.239697] usb usb2: configuration #1 chosen from 1 choice
[ 37.239719] hub 2-0:1.0: USB hub found
[ 37.239728] hub 2-0:1.0: 3 ports detected
[ 37.341678] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18
[ 37.341692] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 37.341711] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 37.341724] ohci_hcd 0000:00:03.2: irq 18, io mem 0xea030000
[ 37.399650] usb usb3: configuration #1 chosen from 1 choice
[ 37.399672] hub 3-0:1.0: USB hub found
[ 37.399682] hub 3-0:1.0: 2 ports detected
[ 37.485574] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 37.502171] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
[ 37.502185] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 37.502226] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 37.502256] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 37.502266] ehci_hcd 0000:00:03.3: irq 19, io mem 0xea031000
[ 37.502274] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.502336] usb usb4: configuration #1 chosen from 1 choice
[ 37.502360] hub 4-0:1.0: USB hub found
[ 37.502367] hub 4-0:1.0: 8 ports detected
[ 37.606821] SIS5513: IDE controller at PCI slot 0000:00:02.5
[ 37.606834] SIS5513: chipset revision 1
[ 37.606837] SIS5513: not 100% native mode: will probe irqs later
[ 37.606848] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[ 37.606858] ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:DMA
[ 37.606869] ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
[ 37.606878] Probing IDE interface ide0...
[ 37.620952] SCSI subsystem initialized
[ 37.625441] libata version 2.20 loaded.
[ 38.117739] hdb: WDC WD2000JB-00GVA0, ATA DISK drive
[ 38.174877] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 38.193940] Probing IDE interface ide1...
[ 38.505542] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 38.730364] usb 1-1: configuration #1 chosen from 1 choice
[ 38.929693] hdc: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
[ 39.033525] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 39.249240] usb 2-1: configuration #1 chosen from 1 choice
[ 39.260434] usbcore: registered new interface driver hiddev
[ 39.269421] input: Microsoft Microsoft IntelliMouse® Optical as /class/input/input2
[ 39.269534] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:03.0-1
[ 39.275362] input: USB IR Receiver USB IR Receiver as /class/input/input3
[ 39.275377] input: USB HID v1.10 Keyboard [USB IR Receiver USB IR Receiver] on usb-0000:00:03.1-1
[ 39.275393] usbcore: registered new interface driver usbhid
[ 39.275396] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 39.601639] ide1 at 0x170-0x177,0x376 on irq 15
[ 39.603275] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 39.604391] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 39.613420] 0000:00:04.0: Using transceiver found at address 1 as default
[ 39.614180] eth0: SiS 900 PCI Fast Ethernet at 0xe000, IRQ 20, 00:15:58:5a:24:16.
[ 39.619165] sata_sis 0000:00:05.0: version 0.7
[ 39.619188] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 39.619199] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 39.619260] ata1: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e502 bmdma 0x0001e800 irq 21
[ 39.619280] ata2: SATA max UDMA/133 cmd 0x0001e600 ctl 0x0001e702 bmdma 0x0001e808 irq 21
[ 39.619292] scsi0 : sata_sis
[ 39.625992] hdb: max request size: 512KiB
[ 39.632300] hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
[ 39.636258] hdb: cache flushes supported
[ 39.636306] hdb: hdb1 hdb2 < hdb5 >
[ 39.699195] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 39.699203] Uniform CD-ROM driver Revision: 3.20
[ 39.929505] ata1: SATA link down (SStatus 0 SControl 3F0)
[ 39.940047] ATA: abnormal status 0x7F on port 0x0001e407
[ 39.940064] scsi1 : sata_sis
[ 40.405514] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 3F0)
[ 40.459082] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 40.459090] ata2.00: ATA-7: MAXTOR STM380211AS, 3.AAE, max UDMA/133
[ 40.459093] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 40.517374] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 40.517378] ata2.00: configured for UDMA/133
[ 40.517597] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5
[ 40.525928] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 40.525939] sda: Write Protect is off
[ 40.525942] sda: Mode Sense: 00 3a 00 00
[ 40.525952] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.525996] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 40.526002] sda: Write Protect is off
[ 40.526004] sda: Mode Sense: 00 3a 00 00
[ 40.526013] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 40.526016] sda: sda1 sda2 < sda5 >
[ 40.595259] sd 1:0:0:0: Attached scsi disk sda
[ 40.599401] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 40.848790] Attempting manual resume
[ 40.848793] swsusp: Resume From Partition 8:5
[ 40.848796] PM: Checking swsusp image.
[ 40.878732] PM: Resume from disk failed.
[ 40.928310] kjournald starting. Commit interval 5 seconds
[ 40.928319] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.817457] NET: Registered protocol family 10
[ 50.817533] lo: Disabled Privacy Extensions
[ 52.322211] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.349986] eth0: Media Link On 100mbps full-duplex
[ 52.356567] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 52.416248] Linux agpgart interface v0.102 (c) Dave Jones
[ 52.420914] agpgart: Detected SiS 760 chipset
[ 52.421204] agpgart: AGP aperture is 4M @ 0xd8000000
[ 52.480637] gameport: EMU10K1 is pci0000:00:09.1/gameport0, io 0xeb00, speed 1217kHz
[ 52.536851] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 52.537923] flexcop-pci: will use the HW PID filter.
[ 52.537929] flexcop-pci: card revision 2
[ 52.537936] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 52.553235] DVB: registering new adapter (FlexCop Digital TV device).
[ 52.554725] b2c2-flexcop: MAC address = 00:d0:d7:0c:f8:e9
[ 52.597346] b2c2-flexcop: i2c master_xfer failed
[ 52.801373] b2c2-flexcop: i2c master_xfer failed
[ 52.820671] b2c2-flexcop: found the mt352 at i2c address: 0x0f
[ 52.820677] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[ 52.820718] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 53.232288] Real Time Clock Driver v1.12ac
[ 53.253093] input: PC Speaker as /class/input/input4
[ 53.287555] parport: PnPBIOS parport detected.
[ 53.287598] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 53.359012] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 53.936533] lp0: using parport0 (interrupt-driven).
[ 53.973271] Adding 3028212k swap on /dev/disk/by-uuid/e78424c5-5d7d-49eb-86dc-9b76d03a8f9d. Priority:-1 extents:1 across:3028212k
[ 54.051733] EXT3 FS on sda1, internal journal
[ 54.324597] kjournald starting. Commit interval 5 seconds
[ 54.324609] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 54.324967] EXT3 FS on hdb1, internal journal
[ 54.324971] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.714570] NET: Registered protocol family 17
[ 61.176018] input: Power Button (FF) as /class/input/input5
[ 61.180374] ACPI: Power Button (FF) [PWRF]
[ 61.215233] input: Power Button (CM) as /class/input/input6
[ 61.219548] ACPI: Power Button (CM) [PWRB]
[ 61.237723] Using specific hotkey driver
[ 61.269805] No dock devices found.
[ 61.312009] ibm_acpi: ec object not found
[ 61.444551] pcc_acpi: loading...
[ 61.480821] eth0: no IPv6 routers present
[ 61.706323] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (version 2.00.00)
[ 61.706364] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 61.706367] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 61.706370] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 61.706372] powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
[ 61.706375] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[ 61.706378] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 65.553388] ppdev: user-space parallel port driver
[ 72.500887] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 72.500892] apm: overridden by ACPI.
[ 73.516324] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 73.757323] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 73.767197] NFSD: starting 90-second grace period
[ 40.584000] Time: acpi_pm clocksource has been installed.
[ 42.436000] Bluetooth: Core ver 2.11
[ 42.436000] NET: Registered protocol family 31
[ 42.436000] Bluetooth: HCI device and connection manager initialized
[ 42.436000] Bluetooth: HCI socket layer initialized
[ 42.464000] Bluetooth: L2CAP ver 2.8
[ 42.464000] Bluetooth: L2CAP socket layer initialized
[ 42.528000] Bluetooth: RFCOMM socket layer initialized
[ 42.528000] Bluetooth: RFCOMM TTY layer initialized
[ 42.528000] Bluetooth: RFCOMM ver 1.8
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
