On 6/13/07, Erich N. Pekarek <epek@xxxxxxx> wrote: > Hello, > > having read various tutorials, having tried various repositories including > v4l-dvb-experimental from mcentral.de, v4l-dvb-test and the regular v4l-dvb, > having installed rc4 of 2.4.22 kernel, while trying to follow the rules of > clean install and reboot, I have to admit, that tuning to 794Mhz for the > Austrian MUX-A seems to be impossible with linux (feisty). The same device > works without problems with a medium to strong signal on XP. > > Current status: i seem to tune, but no SNR-Level seems sufficient for a > lock. > > here is my lsusb: Bus 001 Device 004: ID 0db0:5581 Micro Star International > dmesg is identical to most other postings - ZL10353, QT1010 and GL861 are > being detected on "... 55801 USB 2.0...", no firmware upload takes place. > Setting an additional zl10353_single_write(fe, 0x5A, 0x0C); > as described on > http://linuxtv.org/pipermail/linux-dvb/2007-January/015518.html > shows no effort. > --- > #dvbtune -f 794 > Using DVB card "Zarlink ZL10353 DVB-T"tuning DVB-T (in United Kingdom) to > 794000 Hz > polling.... > Getting frontend event > FE_STATUS: > polling.... > polling.... > > --- > kaffeine shows some signal, two of 99%, SNR reaches 12% once (on the wrong > frequency?) and won´t lock on to it. > > --- > channels.conf copied: > ORF1:794000000:I999B8C999D999M16T8G4Y0:T:27500:1010:1011,1012;1013:1015:0:10101: > 8232:100:0 > --- > mplayer: > ... > > Playing dvb://ORF1. > dvb_tune Freq: 794000 > Not able to lock to the signal on the given frequency, timeout: 30 > dvb_tune, TUNING FAILED > ERROR, COULDN'T SET CHANNEL 0: Failed to open dvb://ORF1. > > > Exiting... (End of file) > --- > I cannot identify the problem without help. Would someone please assist me > in tracking down and solving the error? > Someone who owns that device maybe can help you to get further with it. > I´ve already returned a WinTV HVR-900 to my dealer, because of the missing > micronas support in the newest revision and get starting depressed :-( The Micronas drx3975d will be supported soon I already received some specs and sample sourcecode. cheers, Markus > > So long and thanks for all the ... help > > Kind regards > Erich > > P.s: dmesg output will follow after another kernel has been compiled. Which > other log files would you like to see? > > -- > Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! > Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > -- Markus Rechberger _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
