More duplication of effort and waste of time. On 6/12/07, Markus Rechberger <mrechberger@xxxxxxxxx> wrote: > Hi, > > this patch is already included in the video4linux/dvb repository on > mcentral.de (including many more devices and many more features eg. > multiple device access, raw read() support, etc.) > > Markus > > On 6/11/07, Paul Walmsley <paul@xxxxxxxxxxx> wrote: > > Hi, > > > > this patch adds support for the Pinnacle Dazzle DVD Recorder DVC 100. > > Tested on 2.6.20 series kernel, digitizing from the composite input, and > it > > works fine. This code came from 'Bernd' at: > > > > http://www.linuxquestions.org/questions/showthread.php?t=497596 > > > > He mentions that his patches were submitted upstream, but the changes > aren't > > in the v4l-dvb Mercurial repo, so, here they are again. > > > > These instructions are also very helpful for using the device on Linux: > > > > > http://www.lea-linux.org/cached/index/Num%C3%A9riser_une_cassette_VHS_sous_Linux.html > > > > Signed-off-by: Paul Walmsley <paul@xxxxxxxxxxx> > > > > --- > > linux/drivers/media/video/em28xx/em28xx-cards.c | 17 +++++++++++++++++ > > linux/drivers/media/video/em28xx/em28xx.h | 1 + > > 2 files changed, 18 insertions(+) > > > > Index: v4l-dvb/linux/drivers/media/video/em28xx/em28xx-cards.c > > =================================================================== > > --- v4l-dvb.orig/linux/drivers/media/video/em28xx/em28xx-cards.c > > +++ v4l-dvb/linux/drivers/media/video/em28xx/em28xx-cards.c > > @@ -334,6 +334,22 @@ struct em28xx_board em28xx_boards[] = { > > .amux = 1, > > }}, > > }, > > + [EM2820_BOARD_PINNACLE_DVC_100] = { > > + .name = "Pinnacle Dazzle DVC 100", > > + .vchannels = 3, > > + .norm = VIDEO_MODE_PAL, > > + .has_tuner = 0, > > + .decoder = EM28XX_SAA7113, > > + .input = {{ > > + .type = EM28XX_VMUX_COMPOSITE1, > > + .vmux = SAA7115_COMPOSITE0, > > + .amux = 1, > > + },{ > > + .type = EM28XX_VMUX_SVIDEO, > > + .vmux = SAA7115_SVIDEO3, > > + .amux = 1, > > + }}, > > + }, > > }; > > const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); > > > > @@ -345,6 +361,7 @@ struct usb_device_id em28xx_id_table [] > > { USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 > > }, > > { USB_DEVICE(0x2040, 0x4200), .driver_info = > > EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, > > { USB_DEVICE(0x2304, 0x0207), .driver_info = > EM2820_BOARD_PINNACLE_DVC_90 > > }, > > + { USB_DEVICE(0x2304, 0x021a), .driver_info = > EM2820_BOARD_PINNACLE_DVC_100 > > }, > > #ifdef CONFIG_XC3028 > > { USB_DEVICE(0x2040, 0x6500), .driver_info = > > EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, > > { USB_DEVICE(0x0ccd, 0x0042), .driver_info = > > EM2880_BOARD_TERRATEC_HYBRID_XS }, > > Index: v4l-dvb/linux/drivers/media/video/em28xx/em28xx.h > > =================================================================== > > --- v4l-dvb.orig/linux/drivers/media/video/em28xx/em28xx.h > > +++ v4l-dvb/linux/drivers/media/video/em28xx/em28xx.h > > @@ -49,6 +49,7 @@ > > #define EM2880_BOARD_TERRATEC_HYBRID_XS 11 > > #define EM2820_BOARD_KWORLD_PVRTV2800RF 12 > > #define EM2880_BOARD_TERRATEC_PRODIGY_XS 13 > > +#define EM2820_BOARD_PINNACLE_DVC_100 14 > > > > #define UNSET -1 > > > > > > -- > > > > > > _______________________________________________ > > linux-dvb mailing list > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > -- > Markus Rechberger > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
