> > >> CamThread: cam 0 is ready > > >> CamThread: LLCI cam slot detected > > >> CamThread: pmt sent to cam > > > > > This looks correct (pmt has been found, encoded & uploaded to the cam). > > Are > > > you sure your cam works correctly with the used scrambling system / > smart > > > card? > > > > The CAM/Smartcard work fine with the BDA drivers provided, under > Windows... > > When I use the DVB channels menu in Kaffeine to scan for channels, the > SIGNAL bar is either 0% or 1% - never higher. It scans and finds channels > fine, and the card works fine under windows so I assume there is enough > signal strength. > > Can you tell me what level you get for SIGNAL? > > Do you think there could be anything else in dvb_ca_en50221.c or > saa7146_i2c.c (or anyother part of the driver) which could be affecting > this?? And to clarify - I seem to be getting a clear signal: [root@media1 ~]# czap -c channels.conf ONE using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file 'channels.conf' 1 ONE:618000000:INVERSION_AUTO:XXXXX00:FEC_AUTO:QAM_64:5011:5012:501 1 ONE: f 618000000, s XXXXX00, i 2, fec 9, qam 3, v 0x1393, a 0x1394 status 1f | signal 01c8 | snr 2126 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 01c7 | snr 226a | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 01c7 | snr 2124 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 01c8 | snr 2321 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 01c6 | snr 2144 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 01c7 | snr 2225 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 01c6 | snr 216a | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 01c8 | snr 204f | ber 00000000 | unc 00000000 | FE_HAS_LOCK _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
