On Wed, May 30, 2007 at 10:33:41PM +0100, Tony Houghton wrote: >I've got 2 DVB-T PCI cards, a Hauppauge Nova-T wwhich uses the budget_ci >(even though it doesn't have a CI) module and a K-World cx88-based card. >I've always used the Hauppage's remote because I've had the card longer, >and the K-World's has fewer useful keys. I used to have to patch the >budget_ci driver's key map, but once that was done it worked well, >generating appropriate press, repeat and release events. > >With the driver in recent kernels (2.6.20 onwards?) I no longer have to >patch it, but the remote doesn't work so well. While holding a key down >I get a series of alternate press and release events with no repeat >events. Sometimes I have to hold down a key for a few seconds before it >starts sending events. > >I tried the K-World remote too. Each time I press a key it generates >just one press event then a release event (even if I haven't released >the key). Like with the Hauppauge remote it doesn't generate any repeat >events, but unlike the Hauppauge it doesn't send further press/release >events until I release the key and press it again, or another key. > >Have I missed some setup detail? Is there a patch or anything? There were some more bugfixes to the IR handling of the budget-ci driver committed to recent -rc linux kernels and to the hg repo, please try with that. If it doesn't work with the most recent version of the driver, please load the module with debug=1 and send the output from dmesg. -- David Härdeman _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
