My artec dvb-t usb work fine with some "old (cvs) dvb driver" using dvb-pll patch.
i try with latest (hg) v4l-dvb and Debian (etch) offciel kernel (2.6.18-4-k7), nothing... :/
my syslog
May 17 15:39:57 john kernel: usb 1-1: new full speed USB device using uhci_hcd and address 9
May 17 15:39:57 john kernel: usb 1-1: configuration #1 chosen from 1 choice
May 17 15:39:58 john kernel: dvb-usb: found a 'Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)' in cold state, will try to load a firmware
May 17 15:39:58 john kernel: dvb-usb: downloading firmware from file 'dvb-usb-dibusb-an2235-01.fw'
May 17 15:39:58 john kernel: usbcore: registered new driver dvb_usb_dibusb_mb
May 17 15:39:58 john kernel: usb 1-1: USB disconnect, address 9
May 17 15:39:58 john kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
May 17 15:40:00 john kernel: usb 1-1: new full speed USB device using uhci_hcd and address 10
May 17 15:40:00 john kernel: usb 1-1: configuration #1 chosen from 1 choice
May 17 15:40:00 john kernel: dvb-usb: found a 'DiBcom USB1.1 DVB-T reference design (MOD3000)' in warm state.
May 17 15:40:00 john kernel: i2c_adapter i2c-6: SMBus Quick command not supported, can't probe for chips
May 17 15:40:00 john kernel: i2c_adapter i2c-6: SMBus Quick command not supported, can't probe for chips
May 17 15:40:00 john kernel: dvb-usb: will use the device's hardware PID filter (table count: 16).
May 17 15:40:00 john kernel: DVB: registering new adapter (DiBcom USB1.1 DVB-T reference design (MOD3000))
May 17 15:40:00 john kernel: DVB: registering frontend 1 (DiBcom 3000M-B DVB-T)...
May 17 15:40:00 john kernel: dibusb: This device has the Panasonic ENV77H11D5 onboard.
May 17 15:40:00 john kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input8
May 17 15:40:00 john kernel: dvb-usb: schedule remote query interval to 150 msecs.
May 17 15:40:00 john kernel: dvb-usb: DiBcom USB1.1 DVB-T reference design (MOD3000) successfully initialized and connected.
dvbscan -a 1 .kde/share/apps/kaffeine/dvb-t/fr-Albi > channels.conf
scanning .kde/share/apps/kaffeine/dvb-t/fr-Albi
using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0'
initial transponder 730000000 0 9 0 3 1 4 0
initial transponder 754000000 0 9 0 3 1 4 0
initial transponder 698000000 0 9 0 3 1 4 0
initial transponder 602000000 0 9 0 3 1 4 0
initial transponder 746000000 0 9 0 3 1 4 0
initial transponder 818000000 0 9 0 3 1 4 0
>>> tune to: 730000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
.... and all failed
same problem using kaffeine (no signal)
modinfo /lib/modules/2.6.18-4-k7/kernel/drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mb.ko
filename: /lib/modules/2.6.18-4-k7/kernel/drivers/media/dvb/dvb-usb/dvb- usb-dibusb-mb.ko
author: Patrick Boettcher <patrick.boettcher@xxxxxxx>
description: Driver for DiBcom USB DVB-T devices (DiB3000M-B based)
version: 1.0
license: GPL
vermagic: 2.6.18-4-k7 SMP mod_unload K7 REGPARM gcc-4.1
depends: dvb-usb,dvb-usb-dibusb-common,i2c-core,usbcore,dvb-pll
alias: usb:v14AAp0001d*dc*dsc*dp*ic*isc*ip*
....
Thanks.
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
