Twinhan DTV-DVB 3056 Hybrid HID PCI won't work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Linux-dvb developers,

here is my problem... I bought the card in subject in a computer store that under XP is reconised as: DTV-DVB 3056 Hybrid HID PCI capture card but under LINUX it won't know to be supported and work correctly.
(see www.twinhan.com/product_D%2BA_3056_1.asp for more info)

Some my work around put me in this situation, I can get a minimal working if I force saa7134 as card=109, in this way kdetv scan analog TV and show me the video in a very good way but no AUDIO, kaffeine or scan (dvb utilitis) are ko and I still didn't try FM + lirc.

If you see below a problem occur in communication between saa7134 and Tuner that appear to me as the main issue.

I am not a developer (I am not able to write codes) but if someone of you guide me to make some tests and debugs, I am very happy :-) and we could have made one more goals for the opensource comunity :-) so other folks with my same card can get help.

Here is a brief of what says kaffeine:

........
Not able to lock to the signal on the given frequency
Frontend closed
dvbsi: Cant tune DVB
Using DVB device 0:0 "Philips TDA10046H DVB-T"
tuning DVB-T to 602000000 Hz
inv:2 bw:0 fecH:1 fecL:9 mod:3 tm:1 gi:3 hier:0
...............

And here is what says dmesg:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 20, latency: 32, mmio: 0xed000000 saa7133[0]: subsystem: 1822:0022, board: Philips Tiger - S Reference design [card=109,insmod option]
saa7133[0]: board init: gpio is 40000
tuner 0-0042: chip found @ 0x84 (saa7133[0])
tuner 0-0042: setting tuner address to 61
tuner 0-0042: type set to tda8290+75a
tuner 0-0042: setting tuner address to 61
tuner 0-0042: type set to tda8290+75a
saa7133[0]: i2c eeprom 00: 22 18 22 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 01 fb 00 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 10 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 84 10 03 32 15 50 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xed000000 irq 20 registered as card -2
tda1004x: found firmware revision 29 -- ok
saa7133[0]/dvb: could not access tda8290 I2C gate
tda827x_probe_version: could not read from tuner at addr: 0xc2
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
saa7133[0]/dvb: could not access tda8290 I2C gate
tda827x_probe_version: could not read from tuner at addr: 0xc2
saa7133[0]/dvb: could not access tda8290 I2C gate
saa7133[0]/dvb: could not access tda8290 I2C gate
tda827x_probe_version: could not read from tuner at addr: 0xc2
saa7133[0]/dvb: could not access tda8290 I2C gate
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
saa7133[0]/dvb: could not access tda8290 I2C gate
tda827x_probe_version: could not read from tuner at addr: 0xc2

As I said to me the problem seems a comunication problems with the tuner.

I am sure that the main chips mounted on the board are saa7131E and TDA 10046A, the only quarz I see is a 32.1F6G and unfortunately I can't see last chip near the antenna inputs because a metallic box covers that part.

This card is a Analog TV + DVB + FM + Capture card (composite source + S-video), all inputs (AUDIO included) are on the card.

My distro is UBUNTU Feisty 7.04 with kernel 2.6.20-15-generic and this is what lspci -vv says about my card:

02:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
            Subsystem: Twinhan Technology Co. Ltd Unknown device 0022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
            Latency: 32 (21000ns min, 8000ns max)
            Interrupt: pin A routed to IRQ 20
Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=2K]
            Capabilities: <access denied>


Guys a big Thank you to who will help me!
:-)

Ciao!

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux